1. 서론
This manual provides essential information for the safe and effective use of your PROLINE CM86-5/16 Carbide Tipped Rotary Masonry Drill. Please read these instructions carefully before use and retain them for future reference.
1.1개 제품 이상view
The PROLINE CM86 series carbide tipped rotary masonry drills are engineered for drilling into coarse materials that produce a powder or gravel-like debris. These drills are suitable for use with standard rotary power tools and are optimized for light to medium hard building materials.
1.2 주요 특징
- Carbide Tipped: For enhanced durability and cutting performance.
- Deep Flute: Design for efficient debris removal.
- German Made: Craftsmanship ensuring quality.
- 긴 길이: For deeper drilling applications.
- 변하기 쉬운: Compatible with standard rotary power tools.
Image: A single PROLINE CM86-5/16 carbide tipped rotary masonry drill bit, showcasing its deep flute design and carbide tip.
2. 안전 정보
Always prioritize safety when using power tools and drill bits. Failure to follow safety guidelines can result in serious injury.
- 눈 보호 장비 착용: 날아오는 파편으로부터 보호하기 위해 항상 안전 안경이나 고글을 착용하세요.
- 청력 보호 장비를 착용하세요: Use ear protection, especially during prolonged drilling operations.
- 장갑을 착용하세요: Protect hands from sharp edges and vibrations.
- 안전한 작업물: Ensure the material being drilled is firmly clamp움직이지 못하도록 고정하거나 고정합니다.
- 올바른 속도를 사용하세요: Operate your rotary power tool at the appropriate speed for the material and drill bit size.
- 과열을 피하세요: Allow the drill bit to cool periodically, especially during continuous use, to prevent damage to the bit and workpiece.
- 비트 검사: Before each use, inspect the drill bit for any signs of damage, wear, or dullness. Do not use damaged bits.
- 전원 분리: Always disconnect the power tool from its power source before changing drill bits or performing maintenance.
- 작업 공간을 깨끗하게 유지하세요: 작업 공간이 밝고 방해가 되는 것이 없는지 확인하세요.
3. 설정
3.1 드릴 비트 설치
- Ensure Power Tool is Off: Verify that your rotary power tool is unplugged or its battery is removed.
- 척을 열어주세요: Rotate the chuck counter-clockwise to open the jaws wide enough to accept the drill bit shank.
- 비트 삽입: Insert the shank of the PROLINE CM86-5/16 drill bit into the chuck. Ensure it is inserted as far as possible without the flutes touching the chuck jaws.
- 척을 조이세요: Rotate the chuck clockwise to securely tighten the jaws around the drill bit shank. For chucks requiring a key, use the key to ensure maximum tightness. A loose bit can be dangerous and cause inaccurate drilling.
- 보안 확인: Gently pull on the drill bit to confirm it is firmly seated and will not slip during operation.
4. 사용 설명서
4.1 Drilling Masonry Materials
- Select Appropriate Speed: For masonry drilling, generally use a slower speed setting on your rotary power tool. Consult your power tool's manual for specific recommendations.
- 시추 위치를 표시하십시오: Clearly mark the exact spot where you intend to drill.
- 천천히 시작하세요: Begin drilling at a slow speed with light pressure to create a pilot indentation and prevent the bit from wandering.
- 일정한 압력을 가하세요: Once the bit has engaged the material, increase the speed and apply steady, firm pressure. Avoid excessive force, which can overheat the bit or damage the power tool.
- 잔해물 청소: Periodically withdraw the drill bit from the hole to allow debris to clear from the flutes. This is especially important for deep holes.
- 직각을 유지하세요: 직선 구멍을 확보하려면 드릴 비트를 표면에 수직으로 유지하세요.
- 냉각: For prolonged drilling, especially in hard materials, allow the bit to cool down to prevent premature wear.
- 드릴링 마무리: Once the desired depth is reached, slowly withdraw the drill bit from the hole while the drill is still rotating.
4.2 추천 자료
This drill bit is designed for optimal performance in:
- Light to medium hard building materials
- Materials that produce coarse powder or gravel when drilled
Caution: Not recommended for use in materials requiring hammer drill action unless specifically designed for such use by the power tool manufacturer.
5. 유지 관리 및 보관
5.1 청소
After each use, clean the drill bit to remove any dust, debris, or residue. A stiff brush or compressed air can be used. Ensure the bit is dry before storage.
5.2 검사
Regularly inspect the carbide tip for chipping or excessive wear. Check the flutes for any obstructions or damage. A dull or damaged bit should be replaced to ensure safety and efficiency.
5.3 보관
Store drill bits in a dry environment to prevent rust. Keep them in their original packaging or a dedicated drill bit case to protect the tips and prevent accidental injury. Store out of reach of children.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 비트가 효과적으로 드릴링되지 않음 | Bit is dull or damaged; Incorrect drilling speed; Insufficient pressure | Replace bit; Adjust drill speed; Apply steady, firm pressure |
| 과도한 열/연기 | Too much pressure; Incorrect speed; Debris buildup in hole | Reduce pressure; Adjust speed; Clear debris from hole |
| Bit wandering/not starting | No pilot indentation; Bit not perpendicular to surface | Start slowly with light pressure to create indentation; Ensure bit is straight |
| Bit stuck in material | Excessive force; Debris buildup | Carefully reverse drill (if applicable) or gently rock bit to free; Clear debris |
7. 사양
| 모델 번호 | CM86-5/16 |
| 재료 | 카바이드 |
| 품목 치수(L x W x H) | 0.31 x 0.25 x 6 인치 |
| 품목 무게 | 1.3파운드(12팩 기준) |
| 품목 패키지 수량 | 12 |
| 제조업체 | Champion Cutting Tool Corp. |
| 한국어: | 846035014892 |
8. 보증 및 지원
For information regarding warranty coverage or technical support for your PROLINE CM86-5/16 drill bits, please refer to the manufacturer's official web사이트 또는 Ch에 문의하세요ampion Cutting Tool Corp. directly. Keep your purchase receipt as proof of purchase.