소개
The DigiTech HardWire HT-6 Polyphonic Tuner is a robust and accurate pedal designed for guitarists and bassists. It offers polyphonic tuning, allowing you to check the tuning of all six strings simultaneously, as well as precise single-string chromatic tuning. Built with durable construction, the HT-6 provides reliable performance for various tuning needs, including standard, Drop D, and bass tuning modes.
Image: The DigiTech HardWire HT-6 Polyphonic Tuner. This image displays the front view of the pedal, highlighting its sturdy metal construction and the bright LED display designed for clear tuning indication.
설정
- 전원 연결: The HT-6 can be powered by a 9V battery or an external 9V DC power supply (not included).
- To install a 9V battery, unscrew the four screws on the bottom plate and insert the battery, ensuring correct polarity.
- For external power, connect a standard 9V DC power adapter to the "POWER" input jack. The pedal also features a 9V DC output for powering other pedals in a daisy chain.
- 오디오 연결:
- Connect your instrument (guitar or bass) to the "INPUT" jack using a standard 1/4-inch instrument cable.
- Connect the "OUTPUT" jack to your amp앰프나 신호 체인의 다음 페달에 다른 1/4인치 악기 케이블을 사용하여 연결하십시오.
- USB 연결(선택 사항): A mini-USB port is available for firmware updates. Connect a mini-USB cable from the pedal to your computer if updates are required.
이미지: 측면 view of the DigiTech HardWire HT-6. This image illustrates the various connection ports, including the 1/4-inch input and output jacks, and the power input, essential for proper setup.
작동 지침
전원 켜기/끄기
The HT-6 is a true bypass pedal. When the pedal is off (bypassed), your instrument's signal passes directly through without any processing. To engage the tuner, press the footswitch. The LED display will illuminate, and your signal will be muted, allowing for silent tuning.
튜닝 모드
The HT-6 offers several tuning modes, indicated by LEDs on the pedal:
- 폴리포닉 모드: Strum all six strings simultaneously. The pedal will display the tuning status for each string using 15 bright LEDs per string. Green LEDs indicate in-tune, while red/orange LEDs indicate sharp or flat. This mode allows for quick identification of out-of-tune strings.
- Chromatic (Single String) Mode: Play a single string. The display will switch to a precise chromatic tuner for that string, showing whether it is sharp, flat, or in tune. This mode is ideal for fine-tuning individual strings.
- Drop D Tuning: The pedal supports Drop D tuning for guitars. Refer to the pedal's specific controls (if any, usually a button or switch) to select this mode.
- Bass Tuning: The HT-6 is compatible with 4, 5, and 6-string basses. Select the appropriate bass tuning mode for accurate bass guitar tuning.
튜닝 프로세스
- Engage the tuner by pressing the footswitch. Your signal will be muted.
- For a quick check, strum all strings. Observe the LED display to see which strings are out of tune.
- Adjust each out-of-tune string individually. Play the string, and the display will guide you to the correct pitch. Aim for the central green LED.
- Once all strings are in tune, press the footswitch again to bypass the tuner and unmute your signal.
유지
- 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
- 배터리 교체: If using battery power, replace the 9V battery when the display dims or the pedal stops functioning correctly. Always dispose of used batteries responsibly.
- 저장: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight. Disconnect power when not in use for extended periods.
- 펌웨어 업데이트: Periodically check the DigiTech website for any available firmware updates for your HT-6 pedal. Updates can be installed via the USB port.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 페달에 전원이 들어오지 않습니다. | Dead battery or power adapter issue. | Replace 9V battery or check power adapter connection and functionality. Ensure correct polarity if using a non-DigiTech adapter. |
| No signal output when pedal is engaged. | This is normal behavior for tuning mode (signal is muted). Incorrect cable connection. | Ensure the pedal is in bypass mode for signal pass-through. Check all instrument cable connections. |
| 부정확한 튜닝 측정값. | Poor instrument intonation, noisy signal, or incorrect tuning mode selected. | Ensure your instrument's intonation is set correctly. Use high-quality cables. Select the appropriate tuning mode (e.g., single string for precise adjustments). Avoid playing other notes or strings while tuning. |
| Polyphonic mode not displaying all strings correctly. | Unclear strumming or excessive noise. | Strum all strings clearly and evenly. Ensure no other sounds are interfering with the signal. |
명세서
- 모델: HT-6
- 유형: Polyphonic Chromatic Tuner Pedal
- 표시하다: 15 bright LEDs per string
- 튜닝 모드: Polyphonic, Chromatic (Single String), Standard, Drop D, Bass (4/5/6 string)
- 우회로: 진정한 우회
- 입력: 1/4-inch Instrument Jack
- 산출: 1/4-inch Instrument Jack
- 전원 입력: 9V DC (external power supply or 9V battery)
- 전력 출력: 9V DC (for daisy-chaining other pedals)
- 추가 연결: Mini-USB for firmware updates
- 치수(길이 x 너비 x 높이): 약 5.5 x 3.5 x 2.25cm(13.97 x 8.89 x 5.72인치)
- 무게: 약 1.38kg(0.62파운드)
- 색상: 블랙/실버
보증 정보
DigiTech products are designed for reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official DigiTech web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
고객 지원
For technical assistance, product inquiries, or service, please visit the official DigiTech support website or contact their customer service department. Contact information can typically be found on the DigiTech web사이트 또는 제품 포장.