D-Link DES-1210-28P PoE+ Web 스마트 스위치 사용 설명서

1. 서론

This manual provides comprehensive instructions for the D-Link DES-1210-28P PoE+ Web Smart Switch. The DES-1210 Series represents the latest generation of D-Link 10/100 Web Smart Switches, incorporating D-Link Green 3.0 technology and compliance with the IEEE 802.3az Energy Efficient Ethernet standard.

Designed for small and medium-sized businesses, this switch offers robust functionality, enhanced security, and simplified manageability. It supports IPv6 management and configuration, ensuring network protection and future compatibility. Multiple management options facilitate quick deployment, infrastructure expansion, and seamless upgrades.

The DES-1210-28P is equipped with a full suite of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree Protocol, and Link Aggregation Control Protocol (LACP). D-Link's Safeguard Engine provides protection against traffic flooding from malicious attacks. For security, it supports 802.1X port-based authentication, Access Control Lists (ACL), ARP Spoofing Prevention, and DHCP Server Screening.

This model features 24 10/100BASE-TX PoE/PoE+ ports and 4 Gigabit ports – two are dedicated 10/100/1000Mbps copper (RJ45), while the other two are Gigabit “combo” ports, usable with either copper (RJ45) or SFP optical modules. The total PoE power budget for the DES-1210-28P is 193W.

2. 제품 특징

• Web 스마트 스위치: Features 24 10/100Mbps Ports, 2 10/100/1000BASE-T ports, and 2 combo 10/100/1000BASE-T/SFP ports.
• 보안 기능: Includes Access Control List (ACL), D-Link Safeguard Engine, and Port Security for robust network protection.
• 직관적 관리: Configurable via SmartConsole or Web-Based GUI. Supports Built-in MIB Browser for SNMP, D-View 6.0 Module, and Compact CLI through Telnet.
• VoIP Application Support: Supports Auto Voice VLAN and DSCP QoS for optimized Voice over IP performance.
• PoE 지원: Complies with 802.3af and 802.3at standards, offering a total PoE budget of up to 193W.
• Smart Fans: Equipped with smart fans for efficient cooling and noise management.

3. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• D-Link DES-1210-28P PoE+ Web 스마트 스위치
• Rack mount ears (2)
• Accessories package (screws, rubber feet)
• 빠른 설치 가이드
• 전원 코드

If any items are missing or damaged, please contact your local D-Link reseller for assistance.

4. 신체적 이상view

그림 4.1: Front Panel of the DES-1210-28P Switch. This image shows the front of the D-Link DES-1210-28P switch, highlighting the 24 Fast Ethernet PoE/PoE+ ports, 2 Gigabit RJ45 ports, and 2 Gigabit Combo SFP/RJ45 ports. Status LEDs for power, link/activity, and PoE status are also visible.

그림 4.2: Rear Panel of the DES-1210-28P Switch. This image displays the rear of the D-Link DES-1210-28P switch, showing the AC power input connector and grounding screw.

5. 설정 및 설치

5.1 안전 예방 조치

• 전원 볼륨 확인tage is compatible with the switch's requirements (100-240V AC, 50/60Hz).
• 환기구를 막지 마십시오.
• Avoid placing the switch in areas with high humidity or extreme temperatures.
• Always disconnect power before cleaning or servicing the device.

5.2 랙 마운팅

The DES-1210-28P switch can be mounted in a standard 19-inch equipment rack. Use the provided rack mount ears and screws to secure the switch to the rack. Ensure adequate airflow around the unit.

1. Attach the two rack mount ears to the sides of the switch using the screws provided.
2. Align the mounting holes on the ears with the holes on the equipment rack.
3. Secure the switch to the rack using appropriate rack screws (not always included with switch).

5.3 데스크탑 설치

For desktop installation, attach the included rubber feet to the bottom of the switch to prevent scratching and provide stability. Place the switch on a flat, stable surface with sufficient ventilation.

5.4 스위치 연결

• 전원 연결: Connect the provided power cord to the AC inlet on the rear panel of the switch and then to a suitable power outlet.
• 네트워크 장치: Connect your network devices (computers, servers, IP cameras, VoIP phones, access points) to the 10/100BASE-TX PoE/PoE+ ports using standard Ethernet cables.
• 업링크 연결: Use the Gigabit RJ45 or SFP combo ports for uplink connections to other switches, routers, or network backbone devices.

6. 스위치 작동

6.1 초기 전원 켜기

Once connected to power, the switch will automatically power on. Observe the Power LED on the front panel; it should illuminate green, indicating normal operation.

6.2 LED 표시등

전면 패널 LED는 실시간 상태 정보를 제공합니다.

• 전원 LED: 녹색 불이 켜지면 스위치에 전원이 켜져 있음을 나타냅니다.
• 링크/동작 LED(포트당):
  • 녹색 점등: 유효한 네트워크 연결이 설정되었습니다.
  • Blinking green: Data activity is occurring on the port.
• PoE 상태 LED(PoE 포트당):
  • Solid green: PoE power is being supplied to the connected device.
  • Blinking green: PoE fault or overload condition.

6.3 관리 액세스

The DES-1210-28P is a Web Smart Switch, primarily managed via a web-based Graphical User Interface (GUI). It also supports SmartConsole and a Compact Command Line Interface (CLI) via Telnet.

1. Web GUI 액세스:
   • Connect a computer to any port on the switch.
   • Configure your computer's IP address to be in the same subnet as the switch's default IP address (refer to the Quick Installation Guide for default IP).
   • 열기 web 브라우저를 열고 스위치의 IP 주소를 입력하십시오.
   • Log in using the default username and password (typically "admin" for both).
2. SmartConsole: Use the D-Link SmartConsole utility for network discovery and initial configuration.
3. CLI (Telnet): For advanced users, Telnet access provides command-line configuration options.

메모: 보안상의 이유로 최초 접속 후 기본 로그인 정보를 즉시 변경하는 것이 좋습니다.

7. 유지관리

7.1 일반 관리

• 스위치를 깨끗하고 먼지 없는 환경에 보관하십시오.
• Ensure proper ventilation to prevent overheating. Do not obstruct the air vents.
• Avoid exposing the switch to direct sunlight or heat sources.

7.2 청소

To clean the exterior of the switch, use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the device. Always disconnect the power cord before cleaning.

7.3 펌웨어 업데이트

Periodically check the D-Link support web펌웨어 업데이트 사이트입니다. 펌웨어 업데이트는 새로운 기능, 성능 향상 및 보안 강화를 제공할 수 있습니다. 펌웨어 업데이트 패키지와 함께 제공된 지침을 주의 깊게 따르세요.

중요한: Do not power off the switch during a firmware update process, as this may corrupt the device.

8. 문제 해결

8.1 공장 초기화

If you encounter persistent issues or forget the management password, you may need to perform a factory reset. This will revert all settings to their default values.

절차: Locate the reset button (often a small pinhole) on the front or rear panel. With the switch powered on, use a paperclip or similar pointed object to press and hold the reset button for approximately 5-10 seconds until the LEDs flash. Release the button and allow the switch to reboot. The switch will then be accessible with its default IP address and credentials.

9. 사양

10. 보증 및 지원

10.1 보증 정보

D-Link products typically come with a limited lifetime warranty. Please refer to the warranty card included with your product or visit the official D-Link website for detailed warranty terms and conditions specific to the DES-1210-28P model.

Warranty coverage generally includes defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or natural disasters.

10.2 기술 지원

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official D-Link support web대지:

https://www.dlink.com/support

You may also contact D-Link technical support directly via phone or email. Contact information can be found on the D-Link support web웹사이트 또는 빠른 설치 가이드를 참조하십시오.

When contacting support, please have your product model number (DES-1210-28P) and serial number ready.