사용자 설명서

제품 끝view

The Corning PC-420D Stirring Hot Plate is a precision instrument designed for heating and stirring various liquids and solutions in laboratory environments. It features a durable Pyroceram top plate, digital displays for both stirring speed (RPM) and temperature (degrees Celsius), and intuitive control knobs for precise adjustments. This unit is suitable for a wide range of applications in chemistry, biology, and other scientific fields.

오버헤드 view of the Corning PC-420D Stirring Hot Plate. The unit features a white Pyroceram top plate, a grey base with two black control knobs (Stir and Heat), and two red LED digital displays for RPM and temperature. A power cord with a three-prong plug is visible on the right side.

안전 정보

Please read and understand all safety precautions before operating the Corning PC-420D Stirring Hot Plate. Failure to follow these instructions may result in injury or damage to the equipment.

• 전기 안전: Ensure the unit is connected to a properly grounded 120V/60Hz power source. Do not operate with a damaged power cord or plug. Avoid spills near electrical components.
• 화상 위험: The Pyroceram top plate can reach temperatures up to 550°C. Always use appropriate personal protective equipment (PPE), such as heat-resistant gloves. Allow the unit to cool completely before handling or cleaning. The "HOT TOP" indicator will illuminate when the surface is hot.
• 화학 물질 안전: Use caution when heating or stirring flammable or corrosive materials. Ensure adequate ventilation in the work area.
• 안정적인 배치: Always place the hot plate on a stable, level, and heat-resistant surface away from combustible materials.
• 감독: Do not leave the hot plate unattended while in operation, especially when heating liquids.
• 통풍: Ensure proper ventilation to dissipate heat and any fumes generated during operation.

설정

1. 짐 풀기: Carefully remove the hot plate from its packaging. Inspect the unit for any signs of damage during transit. Retain packaging for future storage or transport.
2. 놓기: Position the hot plate on a clean, stable, and level laboratory bench or work surface. Ensure there is sufficient clearance around the unit for ventilation and safe operation.
3. 전원 연결: Connect the three-prong power cord to a grounded 120V/60Hz electrical outlet. The unit is designed for U.S. power standards.
4. Rod Mount Support: If using a support rod (sold separately), attach it to the built-in rod mount support on the rear of the unit.

작동 지침

The Corning PC-420D features intuitive controls for both heating and stirring functions.

컨트롤 오버view:

• 전원 표시기: An illuminated indicator light confirms the unit is powered on.
• Stir Knob: Located on the left, this knob controls the stirring speed. Turn clockwise to increase RPM. The digital display will show the set RPM.
• Heat Knob: Located on the right, this knob controls the heating temperature. Turn clockwise to increase temperature. The digital display will show the set temperature in degrees Celsius.
• 디지털 디스플레이: Two red LED displays show the current stirring speed (RPM) and the set temperature (°C). The temperature display will blink until the set temperature is reached.
• 핫탑 표시기: A warning light indicates when the top plate is hot, even if the heat function is turned off.

절차:

1. 전원 켜기: Ensure the unit is plugged in. The power indicator light will illuminate.
2. Setting Stirring Speed: Place a stir bar into your vessel and position the vessel on the center of the Pyroceram top plate. Turn the "Stir" knob clockwise to the desired RPM. The digital display will show the set speed. Adjust as needed for proper mixing.
3. 설정 온도: Turn the "Heat" knob clockwise to the desired temperature in degrees Celsius. The digital display will show the set temperature and will blink until the set temperature is achieved. The temperature can be set in 5-degree C increments, ranging from 5°C to 550°C.
4. 모니터링: Continuously monitor the process. The microprocessor-based control maintains consistent and repeatable temperature settings within ±2°C.
5. 전원 끄기 : When finished, turn both the "Stir" and "Heat" knobs counter-clockwise to the "Off" position. Unplug the unit from the power source when not in use. Allow the hot plate to cool down completely before cleaning or moving. The "HOT TOP" indicator will remain lit until the surface temperature is below 60°C.
6. 외부 온도 조절: The unit can be used with an external temperature controller and support rod (sold separately) for enhanced temperature precision. Refer to the external controller's manual for specific instructions.

유지

Proper maintenance ensures the longevity and optimal performance of your Corning PC-420D Stirring Hot Plate.

• 청소:
  • 청소하기 전에 반드시 제품의 전원 플러그를 뽑고 완전히 식혔는지 확인하십시오.
  • The Pyroceram top plate is scratch, corrosion, and chemical resistant. Clean spills immediately with a damp 천과 순한 세제를 사용하세요. 표면을 손상시킬 수 있는 연마성 세제나 수세미는 사용하지 마세요.
  • The two-piece casting design helps deflect spills away from electrical areas, simplifying cleaning.
  • 광고로 기기 외부를 닦아냅니다.amp cloth. Do not immerse the unit in water or spray liquids directly onto it.
• 점검: Periodically inspect the power cord for any signs of damage (fraying, cuts). Check the control knobs for smooth operation.
• 저장: 사용하지 않을 때는 핫플레이트를 깨끗하고 건조한 곳에 보관하세요.

문제 해결

This section addresses common issues you might encounter with your hot plate.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Corning customer support.

명세서

보증 및 지원

코닝 PC-420D 교반 가열판에는 다음이 포함됩니다. 2년 보증 from the date of purchase, covering defects in materials and workmanship under normal use. This warranty meets European Standards (EN).

For technical assistance, warranty claims, or service inquiries, please contact Corning customer support. Please have your model number (PC-420D or 6795-420D) and purchase date available when contacting support.

For the most up-to-date contact information, please visit the official Corning web사이트를 참조하거나 제품에 포함된 설명서를 참조하세요.