소개
This manual provides instructions for the setup, operation, and maintenance of your Emerson EM60 Large Display Talking Caller ID Box. Please read these instructions carefully before using the device to ensure proper functionality and longevity.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Emerson EM60 Talking Caller ID Box
- AC 전원 어댑터
- 전화선 코드
- 사용 설명서 (본 문서)
설정
1. 전원 연결
Connect the supplied AC power adapter to the DC IN jack on the back of the EM60 unit and then plug the adapter into a standard electrical outlet. For battery backup, insert 4 AAA batteries (not included) into the battery compartment, observing correct polarity. The batteries provide power during outages, preserving caller ID memory.
2. 전화선 연결
Connect one end of the telephone line cord to the LINE jack on the back of the EM60 unit. Connect the other end of the telephone line cord to your wall telephone jack. If you are connecting a telephone to the EM60, connect it to the PHONE jack on the back of the unit.
Figure 1: Emerson EM60 Talking Caller ID Box. This image displays the front of the device with its large, backlit display and control buttons.
작동 지침
발신자 표시
When an incoming call is received, the EM60 will display the caller's name and number on its large, backlit screen. The display will illuminate to enhance visibility.
Number Announce Feature
The Talking Caller ID feature audibly announces the incoming caller's number. This feature can be enabled or disabled via the unit's settings (refer to the on-screen menu for specific steps).
Memory Function (60 Numbers)
The EM60 stores up to 60 incoming caller ID records. Use the navigation buttons (typically UP 그리고 아래에 arrows) to scroll through the stored call history. Press the VIEW or 선택하다 버튼을 view details of a specific call record.
시간 및 날짜 설정
The unit automatically sets the time and date upon receiving the first caller ID signal. Manual adjustment options are available through the menu settings if required.
유지
청소
To clean the EM60, use a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, as these may damage the unit. Ensure the device is unplugged from the power source before cleaning.
배터리 교체
If the display becomes dim or the memory function is inconsistent during power outages, replace the 4 AAA batteries in the battery compartment. Always replace all batteries at the same time with new ones of the same type.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 없거나 어둡습니다 | 전원이 없거나 배터리가 부족합니다. | Ensure AC adapter is securely plugged in. Replace AAA batteries if installed. |
| No Caller ID information displayed | Caller ID service not activated or incorrect phone line connection. | Contact your telephone service provider to confirm Caller ID service is active. Check telephone line cord connection to the wall jack and EM60 unit. |
| Number Announce not working | Feature disabled or volume too low. | Check the unit's settings to ensure Number Announce is enabled. Adjust volume settings. |
| 시간/날짜가 잘못되었습니다 | First Caller ID signal not received or manual setting required. | Wait for an incoming call with Caller ID. If issue persists, manually set time/date via menu. |
명세서
- 모델: EM60
- 상표: 에머슨
- 전화 유형: 유선
- 전원: 유선 전기 (AC 어댑터)
- 배터리 백업 : AAA 배터리 4개 (포함되지 않음)
- 응답 시스템 유형: 디지털
- 호환 장치: PSTN, Standard Landline Networks
- 여러 줄 작업: 단일 라인 작동
- 거는 사람 확인: 예
- 메모리 용량 : 60개의 숫자
- 품목 크기: 17.3 x 9.7 x 10.2 센티미터
- 품목 무게: 약 0.9파운드
- 제조업체: 에머슨
- UPC/GTIN: 803982995391, 680079560416, 777782631769, 069060016970
보증 및 지원
제품 보증 및 고객 지원에 관한 정보는 일반적으로 제품 포장에 포함되어 있거나 제조업체의 공식 웹사이트에서 확인할 수 있습니다. website. Please refer to the documentation included with your purchase or visit the Emerson web자세한 보증 조건 및 지원 연락처 정보는 해당 사이트를 참조하십시오.