Tork 653008 W2 Maxi Centerfeed Dispenser Instruction Manual

제품 끝view

The Tork 653008 W2 Maxi Centerfeed Dispenser is designed for efficient, single-hand paper towel dispensing. Its robust construction and smart design make it suitable for various professional environments, improving workflow and productivity.

이미지: 앞면 view of the Tork 653008 W2 Maxi Centerfeed Dispenser.

주요 특징:

• 간편한 리필: Side-opening lid for quick and simple paper roll replacement.
• 내구성 있는 구조: Robust hinges ensure longevity and resistance to wear.
• 종이 보호: Splash-proof cover keeps paper dry and hygienic.
• 공간 절약형 디자인: Wall-mounted installation frees up valuable counter space.
• Optimized Dispensing: Allows users to take as much paper as needed, or single sheets, with one hand.
• 호환성: Designed for W2 centerfeed rolls, including Tork references 129262, 151203, 130041, 130052, 530237.

설정 및 설치

The Tork 653008 dispenser is designed for wall mounting. Ensure you have the necessary tools before beginning installation.

필요한 도구:

• 송곳
• 드라이버
• 줄자
• 연필
• 수준
• Appropriate wall anchors and screws (not included)

설치 단계:

1. 위치를 선택하십시오 : Select a suitable wall location, ensuring sufficient clearance for refilling and use. The recommended height for installation is typically between 120-130 cm (47-51 inches) from the floor to the bottom of the dispenser, but adjust as needed for accessibility.
2. 드릴링 지점 표시: Hold the dispenser against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting screws through the pre-drilled holes on the back of the dispenser.
3. 드릴 구멍: Drill holes at the marked points. Use a drill bit appropriate for your wall type and the chosen wall anchors.
4. 앵커 삽입: 드릴로 뚫은 구멍에 벽 앵커를 삽입합니다.
5. 마운트 디스펜서: Align the dispenser with the anchors and secure it to the wall using screws. Ensure the dispenser is firmly attached and does not wobble.
6. 용지 롤 로드: Open the side cover of the dispenser. Place a compatible Tork W2 centerfeed roll inside. Pull the leading edge of the paper through the dispensing opening at the bottom. Close the cover securely.

작동 지침

The Tork 653008 dispenser provides easy, single-hand access to paper towels.

Dispensing Paper:

1. Locate the paper towel emerging from the bottom center of the dispenser.
2. Grasp the end of the paper towel firmly with one hand.
3. Pull the paper towel downwards and slightly away from the dispenser to tear off the desired length. The dispenser's design allows for controlled dispensing, whether you need a small sheet or a longer piece.

Image: Diagram illustrating the process of pulling paper from a centerfeed dispenser.

Image: Tork dispenser highlighting its ease of use, approved by the Swedish Rheumatism Association.

유지

Regular maintenance ensures optimal performance and hygiene of your Tork dispenser.

Refilling the Dispenser:

1. When the paper roll is empty or nearly empty, open the side cover of the dispenser.
2. Remove any remaining paper core or scraps.
3. Place a new, compatible Tork W2 centerfeed roll into the dispenser.
4. Pull the leading edge of the paper from the center of the roll and thread it through the dispensing opening at the bottom of the dispenser.
5. Close the side cover securely until it clicks into place.

디스펜서 청소:

• 디스펜서 외부를 정기적으로 닦아주세요.amp 천과 순하고 마모성이 없는 세척액을 사용하세요.
• Avoid using harsh chemicals or abrasive scrubbers, as these can damage the plastic surface.
• Ensure the dispenser is dry after cleaning to maintain hygiene. The splash-proof cover helps protect the internal paper roll from moisture.

문제 해결

If you encounter issues with your Tork 653008 dispenser, refer to the following common solutions:

명세서

보증 및 지원

For information regarding product warranty, please refer to the documentation provided at the time of purchase or visit the official Tork web대지.

For further assistance, technical support, or to inquire about spare parts, please contact Tork customer service or visit the Tork brand store:

Tork Official Brand Store