Amazon Basics CR612807

Amazon Basics Wireless Remote Control Shutter Release for Nikon Digital SLR Camera

모델: CR612807

1. 서론

The Amazon Basics Wireless Remote Control Shutter Release for Nikon Digital SLR Camera provides a convenient method for activating your camera's shutter remotely. This device is designed to minimize camera shake, which is crucial for achieving sharp images, especially in low-light conditions or when using longer exposures. It is also ideal for self-portraits or group photos where you need to be in the shot.

2. 패키지 내용

  • Amazon Basics Wireless Remote Control Shutter Release
  • 1 CR2032 Battery (pre-installed or included separately)
  • Small carrying pouch (may vary by package)
  • 사용 설명서
Amazon Basics Wireless Remote Control Shutter Release with carrying pouch

Image: The Amazon Basics Wireless Remote Control next to its small black carrying pouch.

3. 사양

모델 번호CR612807
상표아마존 기본 정보
치수6.38 x 4.45 x 1.46 인치
품목 무게0.15 온스
전원CR1 배터리 2032 개
무선 범위최대 16피트(약 5미터)
특징인체공학적 디자인

4. Compatible Nikon Cameras

This wireless remote control is compatible with the following Nikon Digital SLR Camera models:

  • D7500, D750, D7200, D7100, D7000
  • D610, D600, D90, D80, D70s, D70, D60, D50
  • D5500, D5300, D5200, D5100, D5000
  • D40x, D40, D3400, D3300, D3200, D3000
  • Nikon 1 J1, P6000, P7000

Note: Always refer to your camera's instruction manual to confirm compatibility with infrared remote controls.

5. 설정

5.1 배터리 설치

  1. 리모콘 뒷면에서 배터리함을 찾으세요.
  2. 작은 드라이버나 동전을 사용하여 배터리함 덮개를 조심스럽게 여세요.
  3. CR2032 배터리 하나를 양극(+)이 위를 향하도록 삽입하세요.
  4. Replace the battery compartment cover and ensure it is securely closed.
Amazon Basics Wireless Remote Control with CR2032 battery

Image: The Amazon Basics Wireless Remote Control next to a CR2032 coin cell battery, illustrating the battery type.

5.2 Camera Preparation

Before using the remote control, you must configure your Nikon camera to receive infrared signals. The exact steps may vary slightly depending on your camera model, but generally involve:

  1. 카메라를 켜세요.
  2. Access your camera's menu or shooting mode settings.
  3. Locate the "Remote Control" or "Release Mode" option.
  4. Select a remote control mode, such as "Delayed Remote" (often indicated by a remote icon with "2s") or "Quick Response Remote" (often indicated by a remote icon without "2s").
  5. Ensure the camera's infrared receiver is unobstructed and facing the general direction of the remote control.

Consult your Nikon camera's user manual for specific instructions on enabling remote control functionality.

6. 사용 설명서

6.1 Taking a Picture (Immediate Release)

  1. Ensure your camera is set to "Quick Response Remote" mode.
  2. Point the remote control towards the camera's infrared receiver.
  3. Press the main shutter button on the remote control. The camera will immediately take a picture.
Amazon Basics Wireless Remote Control Shutter Release

Image: The Amazon Basics Wireless Remote Control, showing its single large shutter button.

6.2 Taking a Picture (2-Second Delay)

  1. Ensure your camera is set to "Delayed Remote" mode (2s).
  2. Point the remote control towards the camera's infrared receiver.
  3. Press the main shutter button on the remote control. The camera will wait for 2 seconds before taking the picture, allowing you time to adjust your pose or hide the remote.

6.3 전구 모드 작동

For long exposure photography using Bulb mode:

  1. 카메라를 벌브 모드로 설정하세요.
  2. Point the remote control towards the camera's infrared receiver.
  3. Press the shutter button on the remote once to open the shutter.
  4. Press the shutter button again to close the shutter. The exposure duration will be the time between the two presses.

Video: An official AmazonBasics video demonstrating the use of the wireless remote control for Nikon Digital SLR Cameras, including basic shutter release and bulb mode functionality.

7. 유지관리

7.1 청소

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or solvents.

7.2 배터리 교체

If the remote control stops responding or its range decreases, the CR2032 battery may need to be replaced. Follow the battery installation steps in Section 5.1.

8. 문제 해결

  • 리모컨이 작동하지 않음 :
    • 배터리가 올바르게 설치되었는지, 그리고 충전량이 충분한지 확인하십시오.
    • Ensure your camera's remote control mode is activated (refer to Section 5.2).
    • Verify that the remote control is pointed directly at the camera's infrared receiver.
    • 리모컨과 카메라 사이에 장애물이 없는지 확인하십시오.
    • Check the operating range (up to 16 feet).
  • Camera shake still present:
    • Ensure the camera is on a stable surface or tripod.
    • Use the 2-second delay mode to allow any residual vibrations from pressing the remote button to dissipate before the shutter fires.

9. 안전 정보

  • 리모컨을 물이나 습기로부터 멀리하십시오.
  • 극한 온도에 노출시키지 마십시오.
  • 장치를 분해하거나 개조하지 마십시오.
  • 배터리는 현지 규정에 따라 올바르게 폐기하세요.
  • Keep coin cell batteries out of reach of children. Swallowing can cause severe injury or death.

10. 보증 및 지원

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Amazon Basics web대지.

© 2026 Amazon Basics. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.