Mackie PROFX12 12-Channel Compact Effects Mixer with USB User Manual

소개

The Mackie PROFX12 is a professional 12-channel compact effects mixer designed for a variety of audio applications, from live sound to studio recording. It features integrated effects and a USB I/O for seamless computer integration. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your PROFX12 mixer.

Mackie PROFX12 12-Channel Compact Effects Mixer with USB

Figure 1: Mackie PROFX12 12-Channel Compact Effects Mixer. This image shows the overall layout of the mixer, including input channels, main mix section, and effects controls.

주요 특징:

Professional 12-channel compact mixer with onboard effects and USB I/O.
Six low-noise, high-headroom Mackie mic preamps with easy LED metering.
32-bit RMFX processor with 16 "Gig-Ready" reverbs, choruses, and delays.
Precision 7-band graphic EQ for tuning Mains or Monitors.
USB I/O for recording shows and music playback via Mac or PC.

중요한 안전 정보

Please read and understand all instructions before using this product. Retain this manual for future reference.

전원: Connect the unit only to the type of power source indicated on the unit.
접지: 감전을 방지하기 위해 올바르게 접지하십시오.
물과 습기: 본 제품을 비나 습기에 노출시키지 마십시오. 물 근처에서 사용하지 마십시오.
통풍: 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
청소: 마른 천으로만 닦으십시오.
서비스: 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오. 장비가 어떤 식으로든 손상된 경우 서비스가 필요합니다.

설정

1. 풀기

Carefully unpack your Mackie PROFX12 mixer and inspect it for any signs of damage. If you find any damage, contact your dealer immediately.

Figure 2: Mackie PROFX12 Product Box. The packaging protects the mixer during transit.

패키지에는 다음이 포함되어야 합니다.

Mackie PROFX12 Mixer
전원 코드
USB 케이블
사용 설명서 (본 문서)

2. 물리적 연결

Before connecting any cables, ensure the mixer is powered off and disconnected from the mains power supply.

Figure 3: Mackie PROFX12 Rear Panel. This view shows the power input, USB port, and main output connections.

전원 연결:

Connect the supplied power cord to the AC input on the rear panel of the mixer.
전원 코드의 다른 쪽 끝을 적절한 AC 콘센트에 꽂으십시오.
Do not power on the mixer until all other connections are made.

오디오 입력 :

마이크: Connect microphones to the XLR inputs (channels 1-6) using balanced XLR cables. Ensure phantom power is only enabled if required by your condenser microphones.
라인 레벨 장치: Connect instruments or other line-level devices to the 1/4-inch TRS/TS inputs on channels 1-12. Stereo devices can be connected to stereo channels (e.g., 7/8, 9/10, 11/12) using 1/4-inch cables.
RCA 입력: RCA 입력 단자를 사용하여 CD 플레이어나 미디어 플레이어와 같은 재생 장치를 연결하십시오.

오디오 출력 :

주요 출력 : Connect the Main Left and Right XLR or 1/4-inch outputs to your power amp전원 공급기 또는 전원 스피커.
모니터 출력: Use the Monitor Send output to connect to stage monitors or a separate monitor amp리퍼.
FX 보내기: The FX Send output can be used to route signal to external effects processors if desired.
헤드폰 출력: Connect headphones to the 1/4-inch headphone jack for monitoring.

3. USB 연결

The PROFX12 features a built-in USB audio interface for recording and playback with a computer.

Connect a standard USB cable from the USB port on the rear panel of the PROFX12 to an available USB port on your Mac or PC.
The mixer should be recognized automatically by most modern operating systems without the need for additional drivers.
Select the PROFX12 as your audio input/output device in your computer's sound settings or Digital Audio Workstation (DAW) software.

믹서 작동

1. 채널 스트립 컨트롤

Each input channel on the PROFX12 features a set of controls to shape the sound.

게인 컨트롤 : Adjusts the input sensitivity for the connected microphone or line-level device. Set this to achieve a strong signal without clipping (indicated by the "OL" LED).
3밴드 EQ: Provides High, Mid, and Low frequency adjustments for tone shaping. Use these to enhance or cut specific frequencies.
보조 전송: Routes a portion of the channel's signal to the Aux Send output, typically used for monitor mixes.
FX 보내기: Routes a portion of the channel's signal to the internal RMFX effects processor.
팬 제어: 스테레오 필드(좌우) 내에서 채널 신호의 위치를 지정합니다.
채널 페이더: 메인 믹스에서 해당 채널의 전체 볼륨 레벨을 조절합니다.
음소거 버튼: 채널을 음소거합니다.
PFL(Pre-Fader Listen) 버튼: Routes the channel's signal to the headphones for solo monitoring before the fader.

2. Main Mix Section

The main mix section controls the overall output of the mixer.

메인 페이더: 메인 스테레오 출력의 전체 볼륨을 조절합니다.
제어실/헤드폰 출력: Provides independent level control for the control room outputs and headphone jack.
팬텀 전원(+48V): Activates phantom power for condenser microphones connected to XLR inputs. Use with caution and only when required.

3. RMFX Effects Processor

The PROFX12 features a 32-bit RMFX processor with 16 built-in effects.

Mackie PROFX12 RMFX Effects and USB Input Level Section

Figure 4: RMFX Effects and USB Input Level Section. This image details the effects preset display, selection knob, mute button, and USB input level control.

사전 설정 선택: Use the "Presets" knob to cycle through the 16 available effects (reverbs, choruses, delays). The selected preset number is shown on the digital display.
FX 음소거: Mutes the output of the effects processor.
FX 레벨: 메인 믹스로 전송되는 효과음의 전체적인 레벨을 조절합니다.

4. 7-Band Graphic EQ

A precision 7-band graphic EQ is provided for fine-tuning the frequency response of your main or monitor outputs.

Each slider corresponds to a specific frequency band. Adjusting a slider up boosts that frequency, while adjusting it down cuts that frequency.
Use the "Assign" button to route the graphic EQ to either the Main Mix or the Monitor Mix.

5. USB Audio Interface Operation

The USB I/O allows for stereo recording of your main mix and stereo playback from your computer.

녹음: The main stereo mix is sent to your computer via USB. Open your DAW software and select the PROFX12 as your input device to record.
재생: Audio from your computer can be played back through the mixer. Use the "USB Input Level" control to adjust the playback volume. The "USB Thru" button routes the USB input directly to the main mix.

유지

청소: Clean the mixer with a soft, dry, lint-free cloth. Do not use liquid cleaners or solvents.
먼지: Keep the mixer free from dust. Use a soft brush or compressed air to clean faders and knobs.
저장: 장기간 사용하지 않을 경우 믹서를 서늘하고 건조한 곳에 보관하십시오. 가능하면 원래 포장이나 보호 케이스에 넣어 보관하는 것이 좋습니다.
액체를 피하세요: Never allow liquids to spill onto or into the mixer.

문제 해결

문제	가능한 원인	해결책
사운드 출력이 없습니다	전원이 연결되지 않았거나 켜져 있지 않습니다. 메인 페이더 또는 채널 페이더가 모두 내려갔습니다. 음소거 버튼이 활성화되었습니다. 잘못된 입력/출력 연결.	전원 케이블과 스위치를 확인하십시오. Raise faders to appropriate levels. 활성화된 음소거 버튼을 모두 해제하십시오. 모든 오디오 케이블이 올바르게 연결되었는지 확인하십시오.
왜곡된 소리	입력 게인이 너무 높습니다(클리핑). 출력 레벨이 너무 높습니다. 케이블에 결함이 있습니다.	Reduce input gain until "OL" LED no longer flashes. Lower main faders or amp라이터 볼륨. Test with a different cable.
Hum or noise when using USB	접지 루프 문제. USB input level too high on computer.	모든 장비가 동일한 멀티탭이나 콘센트에 연결되어 있는지 확인하십시오. Reduce the USB input volume on your computer and compensate by increasing the USB input level on the mixer.
효과음 없음	FX Send knob on channel is down. FX Mute button engaged. FX Level knob is down.	Increase the FX Send on the desired channel. Disengage the FX Mute button. Increase the FX Level knob.

명세서

상표	마키
모델	프로FX12
채널 수	12
연결 기술	USB
전원	코드식 전기
품목 무게	11.2 파운드
주파수 응답	12 KHz (Note: This is likely a specific point, not full range. Refer to full spec sheet for details.)
출력 커넥터 유형	XLR, TRS
오디오 입력 유형	RCA, XLR
한국어:	663961025132, 663961025149

보증 정보

The Mackie PROFX12 mixer comes with a 1-year all-inclusive, non-transferable warranty. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the official Mackie web사이트를 방문하거나 고객 지원팀에 문의하세요.

지원하다

For further assistance, technical support, or service inquiries, please visit the official Mackie website or contact their customer support department. You can often find FAQs, driver downloads, and additional resources online.

Mackie 공식 Web대지: www.mackie.com

Mackie PROFX12

소개