소개
The Vitalograph asma-1 is a lightweight, electronic respiratory monitor designed for home use. It accurately measures Peak Expiratory Flow (PEF) and Forced Expiratory Volume in one second (FEV1), providing essential data for monitoring respiratory health, particularly for individuals with asthma. This device offers a more precise alternative to traditional mechanical peak flow meters and eliminates the need for manual record cards by electronically storing test results.
Image: The Vitalograph asma-1 monitor, showing its compact design and digital display.
설정
- 장치 포장 풀기: Carefully remove the Vitalograph asma-1 monitor and all accessories from its packaging. The package includes the monitor, a pouch, instructions for use, 2 x AAA batteries, and a plastic mouthpiece for single patient use.
- 배터리 설치: Locate the battery compartment on the back of the device. Insert the two AAA batteries, ensuring correct polarity as indicated inside the compartment. Close the battery cover securely.
- 마우스피스를 부착하세요: For each use, attach a clean, single-use plastic mouthpiece to the device's opening. Ensure it is firmly seated to prevent air leakage during measurement.
작동 지침
Follow these steps to perform a respiratory measurement:
- 전원 켜기: Press the power button (usually located on the side or top) to turn on the device. The display will show a prompt to begin the test.
- Deep Breath: 숨을 깊게 들이쉬어 폐를 완전히 채우세요.
- Seal Lips: Place the mouthpiece firmly in your mouth, sealing your lips tightly around it.
- Exhale Forcefully: Blow out as hard and as fast as you can into the mouthpiece. Continue exhaling until your lungs feel empty.
- 결과 읽기: The device will display your PEF (Peak Expiratory Flow) and FEV1 (Forced Expiratory Volume in one second) values. The device automatically stores the best values from a test session.
- Repeat Tests: For accurate results, it is recommended to perform three measurements. The device will typically select the best result from these attempts.
- Personal Best Zones: You can set unique 'personal best' zones on the device to help interpret your results (Green, Yellow, Red zones). Refer to your healthcare provider for guidance on setting these zones.
메모: The device requires single-use mouthpieces for each patient to ensure hygiene and prevent cross-contamination. These mouthpieces are sold separately.
유지
- 청소: 부드러운 천으로 기기 외부를 닦아주세요.amp cloth. Do not immerse the device in water or use abrasive cleaners. Ensure the mouthpiece is disposed of after each use.
- 저장: Store the Vitalograph asma-1 in its protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
- 배터리 교체: 디스플레이에 배터리 부족 표시가 나타나면 배터리를 교체하세요.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | 배터리가 방전되었거나 잘못 삽입되었습니다. | 배터리 극성을 확인하거나 새 AAA 배터리로 교체하세요. |
| 부정확한 판독값. | Improper technique (not blowing hard/fast enough), mouthpiece not sealed correctly, or device malfunction. | Ensure proper technique and tight seal around mouthpiece. If issues persist, contact support. |
| 화면에 오류 메시지가 표시됩니다. | 장치 내부 오류입니다. | 기기를 껐다가 다시 켜십시오. 오류가 계속 발생하면 고객 지원팀에 문의하십시오. |
명세서
- 모델: 40000
- 조치: PEF (Peak Expiratory Flow), FEV1 (Forced Expiratory Volume in one second)
- 메모리: 600 test memory
- 표시하다: 크고 읽기 쉬운 디지털 디스플레이
- 힘: AAA 배터리 2개
- 치수(길이 x 너비 x 높이): 약 6 x 2.5 x 2인치
- 무게: 약 4.47온스
- 색상: 파란색
- 규정 준수: Compliant with ATS/ERS 2019 Technical Standards and ISO 23747 / 26782 / 13485
- 용법: Suitable for home use and in clinic with Bacterial Viral Filters (BVF).
보증 및 지원
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Vitalograph website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Vitalograph customer service directly. Contact details are typically provided in the product packaging or on the manufacturer's web대지.