제품 끝view
The Weiser GA531 T3 SMTK4 MS 6LR1 Troy Entry Knob is a bright brass finished door knob designed for entry doors, providing both security and aesthetic appeal. It features a SmartKey cylinder for enhanced security and easy rekeying.
이미지: 클로즈업 view of the Weiser Troy Entry Knob, showcasing its bright brass finish and the keyhole of the SmartKey cylinder.
주요 특징
- Bright brass finish for a classic aesthetic.
- Equipped with a SmartKey cylinder, eliminating traditional pins and springs for enhanced security.
- Allows for easy rekeying in three simple steps using the included rekeying tool.
- Designed to fit standard doors with an adjustable backset of 2-3/8 inches or 2-3/4 inches.
- Part of the Weiser Welcome Home Series, ensuring quality and compatibility.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Troy Entry Knob (Interior and Exterior halves)
- 래치 메커니즘
- 스트라이크 플레이트
- 장착 나사
- Rekeying Tool
- 키
설치 가이드
This section provides general instructions for installing the Weiser Troy Entry Knob. For detailed visual guides, refer to the manufacturer's official installation videos or diagrams.
1. 문 준비
Ensure your door is properly bored for a standard door knob installation. The knob fits standard doors and has an adjustable bracket for 2-3/8'' or 2-3/4'' backsets.
2. 래치 설치
Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with screws.
3. Install the Knobs
Align the posts of the exterior knob with the holes in the latch. Slide the exterior knob into place. Then, align the interior knob and secure it to the exterior knob using the provided screws.
4. 스트라이크 플레이트 설치
On the door frame, align and install the strike plate where the latch bolt will engage when the door is closed. Secure with screws.
Rekeying the Lock (SmartKey Cylinder)
The SmartKey cylinder allows you to rekey your lock to a new key in three easy steps. This is useful if you lose a key or want to match your lock to other SmartKey locks.
- Insert your functioning key fully into the cylinder and turn it 90 degrees clockwise.
- Insert the SmartKey rekeying tool fully into the SmartKey hole. Apply firm pressure and remove the rekeying tool.
- Remove your functioning key. Insert your new key fully into the cylinder and turn it 180 degrees counter-clockwise. Your lock is now rekeyed.
작동 지침
The Weiser Troy Entry Knob operates as a standard keyed entry knob. To lock the door from the exterior, use the key. To lock from the interior, rotate the turn-button on the interior knob. To unlock, use the key from the exterior or rotate the turn-button from the interior.
The SmartKey cylinder provides pick-resistance and bump-resistance for enhanced security.
관리 및 유지 보수
To maintain the bright brass finish and ensure smooth operation of your Weiser Troy Entry Knob, follow these guidelines:
- 청소: 손잡이 부분을 부드러운 천으로 닦아주세요.amp 천으로 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제, 용제 또는 광택제는 사용하지 마십시오.
- 매끄럽게 하기: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway to ensure smooth key insertion and turning. Do not use oil-based lubricants as they can attract dirt.
- 점검: 모든 나사와 부품이 단단히 조여졌는지 정기적으로 확인하십시오. 흔들림이나 오작동을 방지하기 위해 느슨한 나사는 조여주십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 열쇠가 돌아가지 않거나 꽂기가 어렵습니다. | Debris in keyway, worn key, or lack of lubrication. | Clean keyway with compressed air. Lubricate with graphite. Try a new key if available. |
| 손잡이가 헐거워지거나 흔들거립니다. | 장착 나사가 느슨합니다. | 손잡이 안쪽에 있는 장착 나사를 조입니다. |
| Latch bolt does not extend or retract smoothly. | Misalignment, debris, or worn latch. | Check for proper alignment of the latch and strike plate. Clean any debris. Lubricate the latch mechanism. |
| Cannot rekey the lock. | Incorrect key insertion, rekeying tool not fully inserted, or wrong key. | Ensure functioning key is fully inserted and turned 90 degrees. Insert rekeying tool firmly and completely. Use the correct new key. |
제품 사양
| 모델 번호 | GA531 T3 SMTK4 MS 6LR1 |
| 상표 | 바이저 |
| 재료 | 놋쇠 |
| 색상/마감 | Brass/Bright Brass (Polished) |
| 잠금 유형 | Key Lock (SmartKey Cylinder) |
| 조절 가능한 백셋 | 2-3/8 inches or 2-3/4 inches |
| 품목 무게 | 1.25파운드(대략) |
| 제품 치수 | 4.56 x 2.99 x 8.94인치(대략) |
| 포함된 구성 요소 | Knob, Lock, Rekeying Tool |
| 특별 기능 | Easy to Install, Sturdy |
보증 및 지원
Weiser products are manufactured to the highest standards and are backed by a limited lifetime mechanical and finish warranty to the original residential user. For specific warranty details, claims, or technical support, please refer to the official Weiser web사이트 또는 고객 서비스 부서에 문의하십시오.
추가 지원을 받으려면 다음을 방문하세요. Weiser Lock official web대지.