D-Link DAP-1360 Wireless N Access Point User Manual

1. 서론

The D-Link DAP-1360 Wireless N Access Point is a versatile networking device designed to extend or create a wireless network. It connects to a broadband modem, allowing you to share your internet connection wirelessly. This device is compliant with 802.11n standards, offering faster speeds and greater range compared to 802.11g, while maintaining backward compatibility with 802.11g and 802.11b devices. The DAP-1360 can be configured to operate in seven distinct modes to suit various networking requirements.

그림 1: 전면 view of the D-Link DAP-1360 Wireless N Access Point. The device is black with two external antennas and indicator lights on the front panel.

2. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• D-Link DAP-1360 Wireless N Access Point
• 전원 어댑터
• 이더넷 케이블
• 빠른 설치 가이드(포함된 경우)

If any items are missing or damaged, please contact your local D-Link reseller.

3. 설정

3.1 물리적 설치

1. 위치: Place the DAP-1360 in a central location within your desired wireless coverage area, away from obstructions and sources of interference (e.g., microwave ovens, cordless phones).
2. 전원 연결: Plug the power adapter into the DAP-1360's power port and then into a wall outlet. The power LED on the device should illuminate.
3. 네트워크에 연결: Connect one end of an Ethernet cable to the LAN port on the DAP-1360 and the other end to your broadband modem or existing network switch/router.

그림 2: 후면 view of the D-Link DAP-1360, highlighting the Ethernet port and power input for physical connections.

3.2 초기 구성

After physical installation, you will need to configure the DAP-1360 using a web browser. The exact steps may vary slightly depending on your chosen operating mode.

1. 컴퓨터를 연결하세요: Temporarily connect a computer directly to the DAP-1360's LAN port using an Ethernet cable, or connect wirelessly to its default Wi-Fi network (SSID and password usually found on a label on the device).
2. 입장 Web 인터페이스: 열기 web browser and enter the default IP address of the DAP-1360 (e.g., http://192.168.0.50 or http://dlinkap). Refer to the Quick Installation Guide for the precise default IP and login credentials.
3. 로그인: Enter the default username and password (e.g., username: 관리자, 비밀번호: [leave blank] or 관리자).
4. 설치 마법사를 실행하세요: Follow the on-screen setup wizard to select your desired operating mode and configure network settings, including Wi-Fi name (SSID) and password.
5. 설정 저장: Apply and save your configuration changes. The device may restart.

4. 작동 모드

The DAP-1360 offers seven distinct operating modes, allowing it to adapt to various network environments and requirements.

• 액세스 포인트(AP) 모드: This is the default mode. The device acts as a central hub, allowing wireless clients to connect to a wired network. It converts a wired connection into a wireless one.
• 무선 클라이언트 모드: In this mode, the DAP-1360 connects to another access point wirelessly, acting as a wireless adapter for a wired device (e.g., a desktop PC or gaming console without Wi-Fi).
• 브리지 모드: This mode allows two wired networks (LANs) to be joined wirelessly. It creates a wireless link between two segments of a wired network.
• Bridge with AP Mode: Combines the functionality of Bridge mode with Access Point mode. The device acts as a wireless hub for local clients while simultaneously bridging two wired networks.
• 리피터 모드: Extends the coverage of an existing wireless network. The DAP-1360 receives a wireless signal and re-transmits it, eliminating "dead spots" and increasing the range of your Wi-Fi.
• WISP 클라이언트 라우터 모드: Designed for Wireless Internet Service Provider (WISP) subscribers. It allows the DAP-1360 to connect wirelessly to a WISP network and share that internet connection with multiple wired computers in a home or office without needing an additional router.
• WISP Repeater Mode: Similar to WISP Client Router mode, but also extends the WISP connection wirelessly to other wireless devices within the local network, acting as both a client and a repeater for the WISP service.

5. 유지관리

Regular maintenance ensures optimal performance and longevity of your DAP-1360.

• 펌웨어 업데이트: Periodically check the D-Link support web펌웨어 업데이트 사이트입니다. 펌웨어를 업데이트하면 성능이 향상되고, 새로운 기능이 추가되며, 보안 취약점이 수정될 수 있습니다.
• 청소: 기기를 깨끗하게 유지하고 먼지가 쌓이지 않도록 하십시오. 부드럽고 마른 천으로 외부를 닦으십시오. 액체 세척제나 스프레이형 세척제는 사용하지 마십시오.
• 통풍: Ensure the device has adequate ventilation. Do not cover ventilation openings or place the device in an enclosed space that restricts airflow.
• 다시 시작: If the device experiences intermittent issues, a simple restart (unplugging the power for 10 seconds and plugging it back in) can often resolve them.

6. 문제 해결

This section addresses common issues you might encounter with your DAP-1360.

6.1 전원이 켜지지 않음 / 기기가 켜지지 않음

• Ensure the power adapter is securely connected to both the DAP-1360 and a working electrical outlet.
• 다른 장치를 연결하여 전원 콘센트가 작동하는지 확인하세요.
• Check if the power adapter is the correct one supplied with the device.

6.2 접근할 수 없습니다 Web-Based Configuration Utility

• Ensure your computer is directly connected to the DAP-1360 via Ethernet or wirelessly to its default SSID.
• Verify your computer's IP settings are set to "Obtain an IP address automatically" (DHCP).
• 올바른 기본 IP 주소를 사용하고 있는지 확인하십시오(예: http://192.168.0.50) or hostname (http://dlinkap).
• 브라우저 캐시를 지우거나 다른 방법을 사용해 보세요. web 브라우저.
• If you have changed the device's IP address and forgotten it, you may need to perform a factory reset.

6.3 No Internet Connection / Slow Speeds

• Check the physical Ethernet cable connection between the DAP-1360 and your modem/router.
• Verify that your modem/router is working correctly and has an active internet connection.
• Ensure the DAP-1360 is configured in the correct operating mode for your network setup.
• Restart both your modem/router and the DAP-1360.
• 다른 기기에서 발생하는 무선 간섭을 확인하십시오.
• Confirm that your wireless security settings (WPA2, WPA) are correctly configured.

6.4 Wireless Network Not Visible

• Ensure the DAP-1360 is powered on and the wireless LED indicator is active.
• Check if the SSID Broadcast feature is enabled in the device's web 구성.
• Verify that the wireless channel is not conflicting with other networks in your area. Try changing the channel in the settings.
• If the issue persists, try restarting the DAP-1360.

7. 사양

8. 보증 및 지원

For warranty information, please refer to the documentation included with your product or visit the official D-Link website for your region. D-Link provides technical support and resources to assist with product setup and troubleshooting.

For any queries or technical assistance, you may contact D-Link support channels. For specific inquiries related to purchase or local support, you may also contact your reseller. For example, Bizgram Asia Pte Ltd can be reached at +65-87776958 for support in their region.