Nitho Drive Pro Edition Racing Wheel User Manual

소개

This manual provides essential information for the proper setup, operation, and maintenance of your Nitho Drive Pro Edition Racing Wheel. Please read these instructions carefully before using the product to ensure optimal performance and longevity.

Image: The Nitho Drive Pro Edition Racing Wheel packaging, displaying the steering wheel and pedal unit.

제품 특징

• 10-inch diameter steering wheel with a rubberized grip for a realistic feel.
• Constructed with metal components in the steering column for enhanced durability and realism.
• Includes a separate accelerator and brake pedal unit.
• Gearshifter features a brake LED indicator and an accelerator bar, incorporating metal components.
• Compatible with PlayStation 3 (PS3), PlayStation 2 (PS2), and PC systems.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Nitho Drive Pro Edition Racing Wheel
• 페달 유닛(가속 페달 및 브레이크 페달)
• Integrated USB Connection Cable
• 사용 설명서 (본 문서)

이미지: 클로즈업 view of the Nitho Drive Pro Edition Racing Wheel, highlighting the central buttons and paddle shifters.

이미지: 클로즈업 view of the Nitho Drive Pro Edition pedal unit, showing the accelerator and brake pedals.

설치 지침

1. 놓기: Place the racing wheel on a stable, flat surface such as a desk or table. Ensure the suction cups on the base of the wheel are clean and can firmly attach to the surface for stability during use.
2. Pedal Unit Connection: 페달 유닛 케이블을 레이싱 휠의 지정된 포트에 연결하십시오.
3. 시스템 연결 : Connect the racing wheel's USB cable to an available USB port on your PlayStation 3, PlayStation 2, or PC.
4. 전원 켜기: Power on your gaming console or PC. The system should detect the racing wheel automatically.
5. 드라이버 설치(PC 전용): For PC use, if the device is not automatically recognized or functions incorrectly, you may need to install specific drivers. Refer to the manufacturer's web최신 드라이버 다운로드 사이트입니다.
6. 구성: Access the game's control settings to configure the racing wheel, pedals, and buttons according to your preference.

이미지: 후면 view of the Nitho Drive Pro Edition Racing Wheel, showing the integrated gearshifter with LED indicators.

작동 지침

Once the racing wheel is set up and configured in your game, you can begin playing.

• 조종: Rotate the steering wheel left or right to control vehicle direction.
• 가속: 오른쪽 페달(액셀러레이터)을 밟아 속도를 높이세요.
• 제동: 왼쪽 페달(브레이크)을 밟으면 속도를 줄이거나 멈출 수 있습니다.
• 기어 변속: Use the paddle shifters located behind the steering wheel or the integrated gearstick (if applicable) to change gears.
• 버튼 기능: Utilize the programmable buttons on the steering wheel for in-game actions such as horn, camera view, or menu navigation.

유지

• 청소: Use a soft, dry cloth to clean the racing wheel and pedal unit. Avoid using abrasive cleaners or solvents, which can damage the surfaces.
• 저장: 사용하지 않을 때는 직사광선과 극한 온도 변화를 피해 깨끗하고 건조한 곳에 보관하십시오.
• 케이블 관리: 케이블이 내부 손상을 입지 않도록 급격한 굽힘이나 꼬임을 피하십시오.

문제 해결

Device not recognized by system:

Ensure the USB cable is securely connected to both the racing wheel and the console/PC. Try a different USB port. For PC, verify that the necessary drivers are installed.

Pedals or buttons not responding:

Check all cable connections, especially between the pedal unit and the racing wheel. Verify in-game control settings to ensure proper mapping.

Steering wheel not stable:

Ensure the surface is clean and smooth for the suction cups to adhere properly. Apply slight pressure when attaching the wheel to activate the suction cups.

진동 피드백이 작동하지 않습니다:

Confirm that vibration feedback is enabled in your game's settings and that the game supports this feature with the racing wheel.

명세서

보증 및 지원

For warranty information and technical support, please refer to the official Nitho web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

Official Nitho Store: Nitho Store on Amazon.in