중요한 보호 조치
전기 제품을 사용할 때는 화재, 감전 및/또는 인명 부상의 위험을 줄이기 위해 다음 사항을 포함한 기본적인 안전 예방 조치를 항상 따라야 합니다.
- 이 기기를 작동하기 전에 모든 지침을 읽으세요.
- 뜨거운 표면을 만지지 마십시오. 손잡이나 손잡이를 사용하십시오.
- 감전을 예방하려면 코드, 플러그 또는 가전제품을 물이나 기타 액체에 담그지 마십시오.
- 어린이가 가전제품을 사용하거나 어린이 근처에서 사용할 때는 면밀한 감독이 필요합니다.
- 사용하지 않을 때와 세척하기 전에는 콘센트에서 플러그를 뽑으세요. 부품을 끼우거나 떼기 전에 식히세요.
- 손상된 코드나 플러그가 있는 기기나 기기가 오작동하거나 어떤 식으로든 손상된 후에는 기기를 작동하지 마십시오. 기기를 가장 가까운 공인 서비스 시설로 돌려보내 검사, 수리 또는 조정하십시오.
- 가전제품 제조업체가 권장하지 않는 부속품을 사용하면 부상을 입을 수 있습니다.
- 옥외에서는 사용하지 마십시오.
- 코드가 테이블이나 카운터 가장자리에 걸려 있거나 뜨거운 표면에 닿지 않도록 하세요.
- 뜨거운 가스나 전기 버너 근처 또는 가열된 오븐에 두지 마십시오.
- 항상 플러그를 제품에 먼저 연결한 다음 코드를 벽면 콘센트에 연결하십시오. 연결을 끊으려면 아무 컨트롤이나 "꺼짐"으로 돌린 다음 벽면 콘센트에서 플러그를 뽑으십시오.
- 본 제품을 본래 용도 외에는 사용하지 마십시오.
이 지침을 잘 보관해 두세요.
부품 식별
Familiarize yourself with the components of your Rival Ice Cream Maker Model 8401:
- 모터 유닛: The electrical component that drives the paddle.
- 뚜껑: Covers the freezer bowl during operation.
- Paddle (Dasher): The mixing arm that churns the ice cream mixture.
- Freezer Bowl (Plastic Jug): The inner container where the ice cream mixture is placed.
- Outer Bucket: Holds the ice and rock salt mixture around the freezer bowl.
그림 1: 위에view of the Rival Ice Cream Maker Model 8401. This image displays the assembled unit, including the motor unit, lid, and outer bucket, with the inner plastic jug visible.
첫 사용 전
Before using your ice cream maker for the first time, it is important to clean all parts that will come into contact with food.
- Wash the freezer bowl (plastic jug), paddle, and lid in warm, soapy water.
- 깨끗이 헹구고 완전히 말리세요.
- 모터 유닛을 광고로 닦으세요.amp 옷감. 모터 장치를 물이나 다른 액체에 담그지 마십시오.
재료 준비
For best results, prepare your ice cream or frozen dessert mixture in advance and chill it thoroughly in the refrigerator for at least 2-3 hours, or overnight. This ensures a smoother, creamier consistency.
- Ensure all ingredients are fresh.
- Do not overfill the freezer bowl; leave at least 1.5 inches (3.8 cm) from the top to allow for expansion during churning.
조립 및 작동 지침
Follow these steps to assemble and operate your Rival Ice Cream Maker:
- Place the Outer Bucket: Position the outer bucket on a stable, flat surface.
- Insert Freezer Bowl: Place the chilled plastic freezer bowl (jug) into the center of the outer bucket.
- 재료 추가: Pour your pre-chilled ice cream mixture into the freezer bowl.
- 패들 삽입: Place the paddle into the freezer bowl, ensuring it rests correctly on the center post.
- 위치 모터 유닛: Place the motor unit onto the outer bucket, aligning the paddle with the motor shaft. Ensure the motor unit is securely seated on the bucket.
- 얼음과 소금을 넣으세요: Fill the space between the freezer bowl and the outer bucket with alternating layers of ice and rock salt. Use approximately 6 cups of ice and 1 cup of rock salt per layer. Continue layering until the ice and salt mixture reaches the top of the freezer bowl. Ensure the ice and salt mixture does not spill into the ice cream mixture.
- 플러그인: Plug the power cord into a standard electrical outlet. The motor will begin to turn, and the paddle will start churning the mixture.
- 교반 과정: The churning process typically takes 20-40 minutes, depending on the recipe and desired consistency. The motor may slow down or stop when the ice cream reaches a thick consistency. This indicates the ice cream is ready.
- 플러그를 뽑고 제거하세요: Once churning is complete, unplug the unit. Remove the motor unit and paddle.
- Serve or Harden: You can serve the ice cream immediately for a soft-serve consistency, or transfer it to an airtight container and place it in the freezer for 2-4 hours to harden.
그림 2: The Rival Ice Cream Maker Model 8401 fully assembled and ready for the churning process. Note the motor unit securely placed on the outer bucket, with ice and salt surrounding the inner jug.
관리 및 청소
Proper cleaning ensures the longevity and hygiene of your ice cream maker. Always unplug the unit before cleaning.
- 모터 유닛: 모터 유닛을 광고로 닦으세요.amp 옷감. 절대로 모터 유닛을 물이나 다른 액체에 담그지 마십시오.
- Freezer Bowl, Paddle, and Lid: 이 부분들은 손세탁만 가능. Wash them in warm, soapy water. Rinse thoroughly and dry completely before storing.
- Outer Bucket: Wash the outer bucket in warm, soapy water, rinse, and dry.
- 재조립하거나 보관하기 전에 모든 부품이 완전히 건조되었는지 확인하십시오.
문제 해결
아이스크림 제조기에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모터가 켜지지 않습니다. | Unit not plugged in; power outlet not working. | 제품이 작동하는 콘센트에 제대로 꽂혀 있는지 확인하십시오. 회로 차단기를 점검하십시오. |
| Ice cream mixture is not freezing. | Insufficient ice or rock salt; mixture not pre-chilled; churning time too short. | Ensure adequate layers of ice and rock salt. Pre-chill mixture thoroughly. Extend churning time. |
| Motor stops during churning. | Ice cream has reached desired consistency and is too thick for the motor to turn; motor overheating. | This is often normal, indicating the ice cream is ready. Unplug and remove ice cream. If not ready, check for obstructions or allow motor to cool before restarting. |
| Ice cream is too soft. | Not enough churning time; mixture too warm. | Churn for a longer period. Ensure mixture is well-chilled before starting. Transfer to freezer to harden. |
제품 사양
| 사양 | 세부 사항 |
|---|---|
| 상표 | 경쟁자 |
| 모델명 | Rival Ice Cream Maker |
| 품목 모델 번호 | 8401 |
| 용량 | 4쿼트 |
| 재료 | 플라스틱 |
| 작동 모드 | 오토매틱 |
| 제품 관리 지침 | 손씻기 |
| 품목 무게 | 6.59파운드 |
| 패키지 크기 | 12.8 x 12.7 x 12.6 인치 |
| 한국어: | 071723699000 |
보증 및 고객 지원
For information regarding product warranty, service, or replacement parts, please contact Rival customer service directly. Keep your purchase receipt as proof of purchase.
Please refer to the official Rival web최신 연락처 정보 및 보증 세부 정보는 웹사이트 또는 제품 포장을 참조하십시오.