1. 서론
The IDENTIV SCR3310 is a high-performance contact smart card reader designed for secure and reliable interaction with various IC cards. This device is compatible with a wide range of applications, including e-tax systems, resident registration cards, and B-CAS cards. This manual provides detailed instructions for proper setup, operation, and maintenance to ensure optimal performance and longevity of your smart card reader.
2. 안전 정보
- 기기를 물이나 과도한 습기에 노출시키지 마세요.
- Avoid extreme temperatures. Operate and store the device within the specified temperature ranges.
- 기기를 열거나 개조하지 마십시오. 이는 보증을 무효화하고 안전상의 위험을 초래할 수 있습니다.
- 장치를 강한 자기장에서 멀리 두십시오.
- Use only with compatible USB ports and power sources.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- IDENTIV SCR3310 Smart Card Reader
- 통합 USB 케이블
- 빠른 시작 가이드(포함된 경우)
4. 설정
4.1 드라이버 설치
Before connecting the SCR3310 to your computer, it is crucial to install the correct drivers. Drivers for this device are available for download from the official IDENTIV support website. Please note that drivers distributed by other vendors, such as NTT, may not be compatible with this specific model.
Download drivers from:
- http://support.identive-group.com/downloads.php?lang=en&open=driver
- http://support.identive-group.com/download_scm/download_scm.php?lang=en
드라이버 설치 프로그램의 화면 지침을 따르십시오. 설치 후 시스템을 다시 시작해야 할 수 있습니다.
4.2 장치 연결
- Ensure the drivers are installed on your computer.
- Plug the USB Type A connector of the SCR3310 into an available USB port on your computer.
- The operating system should detect the device and complete the installation automatically. The status indicator LED on the device will illuminate green when ready for use.
4.3 Card Insertion
When inserting a smart card, ensure the IC chip on the card is facing upwards and slides smoothly into the card slot. Do not force the card.
5. 사용 설명서
5.1 Reading a Smart Card
- Ensure the SCR3310 is connected to your computer and the green status LED is illuminated.
- Insert the smart card into the reader with the IC chip facing up.
- Open the application that requires smart card access (e.g., e-tax software, banking application).
- Follow the application's instructions to read or write data to the card. The reader will automatically communicate with the card.
5.2 상태 표시기
The device features a green LED status indicator:
- 솔리드 그린: The device is powered on and ready for card interaction.
- 녹색 깜박임: Indicates active data transfer or communication with a smart card.
- 끄다: The device is not powered or not connected correctly.
6. 유지관리
6.1 청소
To clean the exterior of the device, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the surface or internal components. Avoid inserting any objects into the card slot for cleaning.
6.2 보관
When not in use, store the smart card reader in a clean, dry environment, away from direct sunlight and extreme temperatures. Protect the USB cable from kinks or damage.
7. 문제 해결
- 장치가 인식되지 않습니다: Ensure the USB cable is securely connected to both the reader and the computer. Try a different USB port. Verify that the correct drivers are installed.
- 카드가 감지되지 않음: Ensure the smart card is inserted correctly with the IC chip facing up. Remove and reinsert the card. Check if the card itself is damaged.
- 드라이버 설치 문제: Confirm you have downloaded the drivers from the official IDENTIV support website. Ensure your operating system is supported (refer to specifications). For Mac OS 10.8 and later, specific driver compatibility issues have been reported; consult IDENTIV support for the latest information.
- Intermittent card detection (especially on Linux systems with internal USB headers): Some internal USB pin header connections, particularly on older Linux systems (e.g., CentOS 6), may experience instability leading to intermittent card detection. If this occurs, try connecting the reader to an external USB port for improved stability.
- e-TAX compatibility issues: Specific e-TAX system compatibility problems have been noted. Ensure your e-TAX software is up-to-date and consult e-TAX support resources for specific requirements related to smart card readers.
8. 사양
| 특징 | 설명 |
|---|---|
| 상표 | 아이덴티브 |
| 모델 | SCR3310 |
| 미디어 유형 | IC 카드 |
| 연결 기술 | USB 타입 A |
| 색상 | 은 |
| Smart Card Interface Speed | Up to 600 kbps (kilobits per second) |
| USB Interface Speed | USB 2.0 최대 속도(12Mbps) |
| Recommended Media/File | IC 카드 |
| 운영 체제 호환성 | Windows® XP/Vista/7/8/10 (32 and 64 bit), Windows® Server 2003/2008/2012, Windows® CE 6.0, 7.0, MacOS 10.5, 10.6.x, 10.7.x, 10.8.x, 10.9.x, 10.10.x, 10.11.x, Linux 2.4.x, 2.6.x, and 3.x (32 and 64 bit), Android 4.0 and higher |
| 하드웨어 인터페이스 | USB |
| 제품 무게 | 0.2파운드(약 90g) |
| 케이블 길이 | 1.5m (USB Type A connector) |
| 상태 표시기 | 녹색 LED |
| MTBF(평균 고장 간격) | 100,000시간 |
| 치수(길이 x 너비 x 높이) | 70 x 70 x 10mm |
| 작동 온도 범위 | 0° ~ 50° C |
| 보관 온도 범위 | -20° ~ 60° C |
| 작동 습도 범위 | 최대 95% RH 비응축 |
9. 보증 및 지원
9.1 보증 정보
The IDENTIV SCR3310 Smart Card Reader comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official IDENTIV web보증 범위에 대한 구체적인 약관은 사이트에서 확인하세요.
9.2 기술 지원
For technical assistance, driver updates, or further inquiries, please visit the IDENTIV support website or contact their customer service. IDENTIV has offices worldwide, and contact information can be found on their official web대지.
공식 지원 Web대지: https://www.identiv.com/contact
이메일: sales@identiv.com