Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. 특징

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• 일일 및 주간 프로그램: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• LCD 디스플레이: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outag에스.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• 장착 옵션: Designed for DIN rail mounting or wall mounting using the included bracket.
• 투명 보호 커버: Provides protection for the display and controls.

3. 설정 및 설치

경고: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 장착

The E305DIN1 timer can be mounted in two ways:

• DIN 레일 장착: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• 벽면 장착: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 전기 연결

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. 전원을 다시 연결하기 전에 모든 연결부가 단단히 고정되었는지, 그리고 올바르게 연결되었는지 다시 한번 확인하십시오.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. 사용 설명서

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 현재 시간 및 요일 설정

1. 를 누르세요 시계 단추.
2. 잡고 있는 동안 시계, 누르세요 낮 버튼을 눌러 현재 요일을 설정합니다.
3. 잡고 있는 동안 시계, 누르세요 시간 버튼을 눌러 현재 시간을 설정합니다.
4. 잡고 있는 동안 시계, 누르세요 최소 버튼을 눌러 현재 분을 설정합니다.

4.2 켜짐/꺼짐 시간 프로그래밍

The timer allows for up to 8 ON/OFF program pairs.

1. 를 누르세요 음식물 button once to enter program mode. The display will show '1 ON'.
2. 사용하세요 낮, 시간, 그리고 최소 프로그램 1의 원하는 작동 시간을 설정하는 버튼입니다.
3. 누르다 음식물 다시. 디스플레이에 '1 OFF'가 표시됩니다.
4. 사용하세요 낮, 시간, 그리고 최소 buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. 를 누르세요 시계 button to exit program mode and return to normal operation.

4.3 수동 오버라이드 기능

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• 를 누르세요 수동 모드를 순환하는 버튼:
• 에: The output is continuously ON, overriding any programmed OFF times.
• OFF : The output is continuously OFF, overriding any programmed ON times.
• 자동 : The timer operates according to the programmed ON/OFF schedules.

5. 유지관리

The Perel E305DIN1 timer requires minimal maintenance.

• 청소: 부드럽고 마른 천으로 외부를 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 배터리 백업 : The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outag네, 배터리를 자격을 갖춘 기술자가 교체해야 할 수도 있습니다.
• 환경 조건: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. 문제 해결

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• 타이머가 설정된 대로 켜지거나 꺼지지 않습니다.
  • 타이머가 켜져 있는지 확인하세요 자동차 mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• 디스플레이가 비어 있거나 깜박입니다.
  • 타이머의 주 전원을 확인하십시오.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• 전원을 끄면 타이머 설정이 초기화됩니다.tage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

이러한 단계를 거쳐도 문제가 해결되지 않으면 고객 지원팀에 문의하세요.

7. 사양

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. 보증 및 지원

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

보증을 위해 구매 증빙서류로 구매 영수증을 보관하세요.