DaVinci Hidden Hardware Twin/Full-Size Bed Conversion Kit (M5789) Instruction Manual

1. 제품 오버view

The DaVinci Hidden Hardware Twin/Full-Size Bed Conversion Kit (M5789) is designed to extend the life of your compatible DaVinci crib by converting it into a larger bed. This kit allows for the transformation of a full-size crib into a full-size bed or a mini crib into a twin bed, providing a seamless transition as your child grows. The rails are constructed from 100% sustainable New Zealand pine wood and finished with a non-toxic, multi-step painting process, ensuring safety and durability.

This kit includes the necessary wooden rails and hardware for conversion. Please note that a twin/full-size bed mattress and box spring are sold separately and are required for the converted bed.

2. 안전 정보

• 조립 및 사용 전에 모든 지침을 읽으십시오. 이 지침을 따르지 않으면 심각한 부상이나 사망을 초래할 수 있습니다.
• 이 지침을 향후 참고용으로 보관하세요.
• 모든 부품이 단단히 고정되어 있는지 확인하십시오. 모든 나사와 볼트가 단단히 조여져 있는지 주기적으로 점검하세요.
• 부품을 교체하지 마십시오. 제조사에서 제공한 부품만 사용하십시오.
• Mattress and Box Spring: A box spring or slats are required to support the mattress in the converted bed. Do not place a mattress directly on the conversion rails without adequate support.
• 중량 제한: The converted bed is designed to support a minimum weight of 60 pounds and a maximum weight of 500 pounds.
• 질식 위험: 조립하는 동안 작은 부품과 하드웨어는 어린이의 손이 닿지 않는 곳에 보관하십시오.

3. 패키지 내용

조립을 시작하기 전에 아래 나열된 모든 부품이 있고 손상되지 않았는지 확인하십시오. 부품이 없거나 손상된 경우 조립을 진행하지 말고 고객 지원 센터에 문의하십시오.

• 2 x Wooden Conversion Rails (Espresso Finish)
• 1 x Hardware Pack (screws, bolts, brackets)
• 1 x 사용 설명서

Tools required for assembly (not included): Screwdriver, Allen wrench.

4. 조립 설명서

This kit converts your existing crib into a twin or full-size bed. The side panels of your crib will become the headboard and footboard of the new bed.

4.1. 준비

1. 구성품들을 조심스럽게 포장에서 꺼내어 흠집이 생기지 않도록 부드럽고 깨끗한 표면에 펼쳐 놓으십시오.
2. Identify the headboard and footboard from your existing crib. These are typically the taller end panels.
3. Disassemble your crib according to its original instructions, removing the mattress support and side rails. Retain the headboard and footboard.

4.2. Attaching Conversion Rails

1. Position the headboard and footboard in their desired locations.
2. Align one of the wooden conversion rails with the pre-drilled holes on the inside of the headboard and footboard posts. Ensure the ledge for the mattress support is facing inwards.
3. Secure the conversion rail to the headboard and footboard using the provided bolts and screws from the hardware pack. Tighten firmly but do not overtighten.
4. Repeat the process for the second wooden conversion rail on the opposite side.
5. Verify that both rails are level and securely attached to both the headboard and footboard.

Image: Illustration of the assembled bed frame with conversion rails attached to the headboard and footboard, showing overall dimensions.

이미지: 클로즈업 view of the conversion rails, highlighting their length (74.5 inches) and height (4.75 inches).

4.3. Mattress Support Installation

1. Place a compatible box spring or bed slats onto the ledges of the installed conversion rails. Ensure the support is stable and covers the entire area where the mattress will rest.
2. Carefully place your twin or full-size mattress onto the installed support.

Image: Diagram illustrating how a full-size crib converts to a full-size bed and a mini crib converts to a twin bed using the conversion kit.

5. 사용 및 관리

5.1. 용도

This conversion kit is intended for use with compatible DaVinci, Babyletto, Babymod, Carter's by DaVinci, and Million Dollar Baby Classic Cribs. It transforms the crib into a stable twin or full-size bed suitable for children and adults within the specified weight limits.

5.2. 청소 및 유지 관리

• 청소: Wipe the wooden rails with a damp 천을 사용하십시오. 연마성 세제나 강한 화학 약품은 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
• 정기 점검: Periodically inspect all hardware connections to ensure they remain tight. Loose connections can compromise the stability and safety of the bed.
• 저장: If disassembling for storage, keep all hardware in a secure bag and store the wooden components in a dry, temperature-controlled environment to prevent warping or damage.

6. 문제 해결

• Rails do not align with crib posts: Double-check that you are using the correct crib end panels as the headboard and footboard. Ensure the rails are oriented correctly with the mattress support ledge facing inwards. Refer to your crib's original manual for proper disassembly.
• 침대를 조립하고 나니 흔들거리는 느낌이 듭니다. Ensure all bolts and screws are fully tightened. Do not overtighten, but ensure a snug fit. Check that the headboard and footboard are stable on their own before attaching the rails.
• Mattress sags or falls through: This kit requires a box spring or bed slats for mattress support. The mattress should not be placed directly on the conversion rails. If using slats, ensure they are adequately spaced and supported.
• 누락되거나 손상된 부품: Do not attempt to use the kit with missing or damaged parts. Contact DaVinci customer support for replacement parts.

7. 사양

8. 보증 및 지원

For warranty information, replacement parts, or technical support, please refer to the official DaVinci web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

온라인 리소스: 추가 지원 및 제품 정보는 다음 웹사이트를 방문하세요. 아마존의 다빈치 스토어.