아미스코 록키 패널 베드 사용 설명서

소개

Thank you for choosing the Amisco Rocky Panel Bed. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

안전 정보

• 제품이나 바닥의 손상을 방지하기 위해 침대를 조립할 때는 항상 부드럽고 깨끗한 표면 위에서 조립하십시오.
• 사용 전에 모든 하드웨어가 단단히 조여졌는지 확인하십시오. 주기적으로 점검하고 필요에 따라 다시 조여주십시오.
• Do not allow children to climb on or play with the bed frame during assembly or once assembled.
• Use only the mattress size recommended for your bed frame.
• 조립하는 동안 작은 부품은 어린이의 손이 닿지 않는 곳에 보관하세요.
• 이 제품은 실내에서만 사용하도록 설계되었습니다.

부품 목록

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Amisco customer service.

• 머리판
• 발판
• 사이드 레일(2)
• Slats (Quantity may vary by size)
• Hardware Pack (bolts, washers, nuts, Allen key)

설치 및 조립 지침

Assembly typically requires two adults. Please follow these steps carefully:

1. 구성 요소 풀기: Carefully remove all parts from the packaging and lay them out on a clean, soft surface. Identify each component using the parts list.
2. 헤드보드에 측면 레일 부착: Align the side rails with the pre-drilled holes on the headboard posts. Insert the appropriate bolts and washers, and loosely tighten with the provided Allen key.
3. 측면 레일을 발판에 부착하세요: Repeat the previous step to attach the other end of the side rails to the footboard posts. Ensure the bed frame is square.
4. 모든 나사를 단단히 조이세요: Once all four connections are made, fully tighten all bolts using the Allen key. Do not overtighten.
5. 슬랫 설치: Place the bed slats across the side rails. Depending on the design, they may rest on ledges or attach with screws. Ensure they are evenly spaced and secure.
6. 최종 확인: Verify that the bed frame is stable and all connections are secure.

사용 설명서(사용법)

• Place your mattress directly onto the installed slats. A box spring may not be necessary depending on your mattress type and desired bed height.
• Ensure the bed is placed on a level surface to prevent wobbling.
• 침대 위에서 뛰지 마세요. 침대 프레임과 살대가 손상될 수 있습니다.

유지

• 청소: 금속 프레임을 부드러운 천으로 닦으세요.amp 천으로 닦아주세요. 연마성 세제나 강한 화학 물질은 마감재를 손상시킬 수 있으므로 사용하지 마세요.
• 하드웨어 검사: Periodically (every 3-6 months) check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
• 환경 관리: Keep the bed away from direct sunlight and extreme temperature changes to preserve the finish.

문제 해결

• 삐걱거리는 소리:

  해결책: Check all bolts and connections. Tighten any loose hardware. Ensure slats are properly seated and not rubbing against the frame. Applying a small amount of lubricant (e.g., silicone spray) to contact points between metal parts can also help.
• 침대가 불안정하거나 흔들거리는 느낌이 듭니다.

  해결책: Verify that all assembly steps were followed correctly and all hardware is fully tightened. Ensure the bed is on a level floor. If the floor is uneven, use furniture glides or shims under the bed legs to stabilize it.

• 손상되었거나 누락된 부품:

  해결책: Do not attempt to use the bed with damaged or missing parts. Contact Amisco customer service for replacement parts.

명세서

보증 및 지원

Amisco products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Amisco website. If you require assistance with assembly, missing parts, or have any questions regarding your Amisco Rocky Panel Bed, please contact Amisco customer service directly.

자세한 내용은 다음을 방문하세요. Amisco Store on Amazon.