Intel DX58SO Extreme Series Desktop Board User Manual

1. 제품 오버view

The Intel DX58SO Desktop Board is a high-performance motherboard designed to harness the power of Intel Core i7-900 series processors. Based on the X58 chipset, it supports LGA1366 sockets and is optimized for demanding users, including PC enthusiasts and gamers. This board features advanced technologies such as Intel QuickPath Interconnect (QPI) and supports multi-GPU configurations with both ATI CrossFire and NVIDIA SLI technologies.

주요 특징:

• Supports Intel Core i7 Processors (LGA1366 socket)
• ATI Crossfire and NVIDIA SLI Support for multi-GPU setups
• Support for up to 16 GB of DDR3 system memory (1600 MHz, 1333 MHz, and 1066 MHz)
• 7.1 Dolby Digital Audio subsystem (Realtek ALC889)
• 12 USB 2.0 ports (8 external, 2 internal headers)
• Six Serial ATA 3.0 Gbit/s ports, including two eSATA ports with RAID support
• Two IEEE-1394a ports
• Integrated Gigabit (10/100/1000 Mbps) Ethernet connection
• Intel Desktop Control Center for performance tuning and monitoring

그림 1.1: 각도 view of the Intel DX58SO Desktop Board, highlighting key components like the LGA1366 CPU socket, DDR3 memory slots, and various expansion ports.

그림 1.2: 상향식 view of the Intel DX58SO Desktop Board, illustrating the overall layout of the board, including heatsinks, PCI Express slots, and SATA connectors.

2. 설정 및 설치

2.1. 시작하기 전에

• 정전기가 없는 환경을 조성하십시오. 정전기 방지 손목 스트랩을 사용하거나 접지된 금속 물체를 자주 만지십시오.
• Gather all necessary components: Intel DX58SO motherboard, compatible Intel Core i7 processor (LGA1366), DDR3 memory modules, power supply, graphics card(s), storage devices, and a compatible ATX case.
• Refer to your case manual for specific mounting instructions.

2.2. 마더보드 설치

1. 사례 준비: 컴퓨터 케이스의 뒤쪽 개구부에 I/O 실드를 설치합니다.
2. 스탠드오프 설치: Securely install the appropriate standoffs in your case that align with the screw holes on the motherboard.
3. 마더보드 장착: Carefully place the motherboard onto the standoffs, ensuring the I/O ports align with the I/O shield. Secure the motherboard with screws.
4. CPU 설치: Open the CPU socket lever. Align the triangular mark on the Intel Core i7 processor with the mark on the LGA1366 socket. Gently place the CPU into the socket. Close the lever to secure the CPU.
5. CPU 쿨러 설치: 서멀 그리스를 바르고(미리 바르지 않은 경우) CPU 쿨러를 제조사의 지침에 따라 설치하세요. CPU 팬 케이블을 마더보드의 CPU_FAN 헤더에 연결하세요.
6. 메모리 설치: Open the clips on the DDR3 DIMM slots. Align the notch on the memory module with the key in the slot. Press firmly on both ends of the module until the clips snap into place. For triple-channel operation, install modules in matching colored slots (e.g., blue slots).

2.3. 구성 요소 연결

• 전원 연결 : Connect the 24-pin ATX main power connector and the 4-pin or 8-pin ATX 12V power connector from your power supply to the corresponding headers on the motherboard. Ensure both are securely seated to prevent damage.
• 그래픽 카드: Insert your PCI Express graphics card(s) into the PCIe 2.0 x16 slots. For SLI or CrossFireX, install multiple cards as per their respective guidelines and connect the necessary bridge.
• 저장 장치: Connect your SATA hard drives and optical drives to the SATA 3.0 Gbit/s ports using SATA data cables. Connect power from your power supply to these devices.
• 전면 패널 커넥터: Connect the power button, reset button, HDD LED, power LED, and front panel USB/audio headers from your case to the corresponding pins on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.
• 주변기기 연결: Connect any additional USB devices, IEEE-1394a devices, or audio peripherals to the available ports.

3. 시스템 운영

3.1. BIOS 구성

Upon first boot, you may need to enter the BIOS (Basic Input/Output System) to configure settings. Typically, you can access the BIOS by pressing the 델 or F2 key during startup. In the BIOS, you can set boot order, adjust system time, and configure various hardware parameters.

3.2. Intel Desktop Control Center

The Intel Desktop Control Center is a utility designed to help you optimize and monitor your system's performance. It allows for automatic tuning of processor, memory, and bus speeds for stability and performance. You can also monitor system temperatures, voltages, and fan speeds. Install this software from the Intel support website or the included driver disc for full functionality.

3.3. Multi-GPU Setup (SLI/CrossFireX)

To utilize the multi-GPU capabilities (NVIDIA SLI or ATI CrossFireX), ensure your graphics cards are properly installed and connected with the appropriate bridge. Install the latest drivers for your graphics cards from the manufacturer's website. The graphics driver software will typically provide options to enable and configure the multi-GPU mode.

4. 유지관리 및 관리

• 먼지 제거: Regularly clean dust from inside your computer case, especially from heatsinks and fans, using compressed air. Dust accumulation can lead to overheating and reduced performance.
• BIOS 업데이트: 인텔 지원 정보를 주기적으로 확인하세요. website for BIOS updates. BIOS updates can improve system stability, add support for new hardware, or fix known issues. Follow Intel's instructions carefully when updating the BIOS.
• 드라이버 업데이트 : Keep your system drivers (chipset, audio, network, graphics) updated to ensure optimal performance and compatibility.
• 물리적 취급: When handling the motherboard or other components, always use proper anti-static precautions to prevent electrostatic discharge (ESD) damage.

5. 문제 해결

일반적인 문제 및 해결책:

• 전원 없음/부팅 불가:
  • Ensure all power cables (24-pin ATX, 4/8-pin 12V CPU) are securely connected to the motherboard and power supply.
  • 전원 공급 장치가 켜져 있고 정상적으로 작동하는지 확인하십시오.
  • 전면 패널 전원 버튼과 마더보드의 연결 상태를 확인하십시오.
• 비디오 출력 없음:
  • Ensure the graphics card is properly seated in its PCIe slot and has adequate power connected.
  • 모니터 케이블이 그래픽 카드와 모니터에 제대로 연결되어 있는지 확인하십시오.
  • 가능하다면 다른 모니터나 그래픽 카드로 테스트해 보세요.
• 시스템 불안정/충돌:
  • Check CPU and memory temperatures using monitoring software. Ensure adequate cooling.
  • Verify memory modules are correctly installed and functioning. Run a memory diagnostic tool.
  • 모든 드라이버가 최신 상태인지 확인하세요.
  • 오버클럭을 한 경우, 안정성을 확인하기 위해 기본 설정으로 되돌리십시오.
• Component Not Recognized (e.g., HDD, RAM):
  • 구성 요소를 다시 장착하십시오.
  • Check data and power cable connections.
  • Verify BIOS settings for component detection.
• BIOS 재설정: If system becomes unbootable due to incorrect BIOS settings, locate the CMOS clear jumper on the motherboard (refer to the motherboard diagram) or remove the CMOS battery for a few minutes to reset BIOS to default settings.

6. 기술 사양

7. 보증 및 지원

Intel products are backed by a manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the documentation included with your product or visit the official Intel support website. For technical assistance, driver downloads, and further troubleshooting resources, please visit 인텔 공식 지원 페이지.

When contacting support, please have your product model number (BOXDX58SO) and serial number ready.