Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle Instruction Manual

1. 소개 및 이상view

The Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle is designed to provide safe and reliable electrical connections in residential and commercial environments. This receptacle complies with the 2011 National Electrical Code (NEC) Article 406.12, which mandates tamper-resistant receptacles in dwelling units to enhance safety, particularly for children.

주요 특징은 다음과 같습니다.

• Tamp향상된 안전성을 위한 내구성 있는 디자인.
• Durable, impact-resistant thermoplastic face and back body.
• Decorator style for modern aesthetics.
• Easy installation with backed-out terminal screws and built-in wire stripper.

2. 안전 정보

경고: Risk of electric shock or electrocution. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. If you are unsure about any part of these instructions, consult a qualified electrician.

• 전기 배선 작업을 하기 전에는 항상 메인 배전반에서 전원을 차단하십시오.
• 절연 장갑과 보안경과 같은 적절한 개인 보호 장비(PPE)를 착용하십시오.
• 모든 전선 연결이 안전하고 적절하게 절연되어 있는지 확인하세요.
• 기기의 정격 전기 용량을 초과하지 마십시오.
• 이 장치는 실내에서만 사용하도록 설계되었습니다.
• Comply with all local and national electrical codes.

3. 패키지 내용

The package contains one (1) Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle.

4. 설치

Follow these steps for proper installation of your Eaton TR1107W receptacle:

1. 전원 끄기: Locate the circuit breaker or fuse that controls the power to the outlet where you will be installing the receptacle. Turn it OFF. Verify power is off using a voltag전자 테스터.
2. (해당되는 경우) 기존 용기를 제거하십시오. Carefully remove the wallplate and unscrew the old receptacle from the electrical box. Disconnect the wires, noting which wire was connected to which terminal.
3. 전선 준비: Strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the circuit wires. The receptacle features a built-in wire stripper for No.14 and No.12 wire to assist with this step.
4. 전선 연결: The Eaton TR1107W receptacle supports side-wire connections and accepts up to No.10 solid wire. Terminal screws are backed out and ready for wiring.
   • 연결하다 녹색 또는 구리 접지선 to the green grounding screw.
   • 연결하다 흰색(중성) 전선 to the silver-colored terminal screws.
   • 연결하다 검은색(핫) 전선 to the brass-colored terminal screws.
   모든 연결이 단단하고 안전한지 확인하세요.
5. 마운트 수용기: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it with the mounting screws provided. The extra long and extra wide mounting straps aid in stable installation.
6. 월플레이트 설치: Attach a compatible decorator wallplate (not included) over the receptacle.
7. 복원력 : Turn the power back ON at the circuit breaker or fuse box. Test the receptacle to ensure proper operation.

그림 1: 전면 view of the Eaton TR1107W Tamper Resistant Decorator Duplex Receptacle. This image highlights the decorator style and the two tamp어-저항성 콘센트.

5. 운영

The Eaton TR1107W is a tamper-resistant receptacle. This means it has an internal shutter mechanism that prevents foreign objects from being inserted into the slots. To insert a plug, apply even pressure to both prongs simultaneously. This will open the shutters and allow the plug to enter. If a plug does not insert easily, ensure both prongs are aligned and apply firm, even pressure.

6. 유지관리

The Eaton TR1107W receptacle requires minimal maintenance. Periodically inspect the receptacle and wallplate for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power at the circuit breaker and replace the device immediately. Clean the surface with a soft, damp 천으로 닦으세요. 연마성 세척제나 용제는 피하세요.

7. 문제 해결

• No Power at Receptacle:
  • Check the circuit breaker or fuse for the circuit. Reset the breaker or replace the fuse if tripped/blown.
  • Ensure all wire connections to the receptacle are secure. Turn off power before checking connections.
  • Test the receptacle with a known working appliance.
• Plug Difficult to Insert:
  • This is normal for tamper-resistant receptacles. Ensure both prongs of the plug are aligned and apply firm, even pressure simultaneously.
  • Do not force the plug, as this can damage the receptacle or the plug.
• Receptacle is Hot to the Touch:
  • Immediately disconnect power to the circuit. This could indicate an overload or a faulty connection. Consult a qualified electrician.

8. 사양

9. 보증 및 지원

For warranty information and technical support, please contact Eaton customer service directly. Refer to the official Eaton web최신 연락처 정보와 보증 조건은 해당 사이트나 제품 포장에서 확인하세요.

이튼 Web대지: www.이튼닷컴