1. 제품 오버view
The KNIPEX 83 10 020 is a robust pipe wrench designed for professional use. It features a Swedish pattern with 90° angled jaws, engineered for secure gripping of pipes and nuts. The jaws are equipped with offset teeth in opposite directions, enhancing grip, and are additionally induction hardened for increased durability and wear resistance.
주요 특징:
- Swedish pattern with 90° angled jaws for optimal access and grip.
- Jaws with offset teeth in opposite directions for enhanced gripping force.
- Induction hardened teeth ensure long-lasting performance and resistance to wear.
- Constructed from durable Chrome Vanadium Steel.
- Powder-coated finish for corrosion resistance.
그림 1: 전체 view of the KNIPEX 83 10 020 90° Pipe Wrench.
2. 설정
The KNIPEX 83 10 020 pipe wrench is ready for use directly out of the packaging. No assembly is required. Before first use, and periodically thereafter, perform a visual inspection:
- 턱을 검사하세요: Ensure the teeth are clean and free from debris or excessive wear.
- 수표 조정 메커니즘: Verify that the adjustment nut turns smoothly and securely locks the jaws in place.
- Examine Handles: Confirm handles are free from cracks or damage that could affect grip or structural integrity.
Figure 2: Close-up of the knurled adjustment nut for jaw width.
3. 사용 설명서
This pipe wrench is designed for gripping and turning pipes, fittings, and hexagonal nuts. Always wear appropriate personal protective equipment, such as safety gloves and eye protection, when using hand tools.
3.1 Adjusting Jaw Opening
- Hold the wrench firmly.
- 회전urled adjustment nut (as shown in Figure 2) to open or close the jaws.
- Adjust the jaws so they are slightly wider than the object you intend to grip.
3.2 Gripping and Turning
- Position the wrench jaws around the pipe or nut. Ensure the object is seated deeply within the jaws for maximum contact with the teeth.
- Tighten the adjustment nut until the jaws firmly grip the object. The offset teeth are designed to bite into the material, providing a secure hold.
- Apply force to the handle in the desired direction of rotation. The 90° angled jaws allow for effective leverage, especially in confined spaces.
- For optimal grip, ensure the direction of rotation causes the jaws to tighten further onto the object.
Figure 3: Wrench jaws securely gripping a hexagonal nut.
Figure 4: Wrench jaws gripping a round pipe, demonstrating the secure hold.
4. 유지관리
Proper maintenance ensures the longevity and optimal performance of your KNIPEX pipe wrench.
- 청소: After each use, wipe down the wrench with a clean, dry cloth to remove dirt, grease, and moisture. For stubborn grime, a mild solvent can be used, followed by thorough drying.
- 매끄럽게 하기: Periodically apply a light machine oil to the adjustment screw and pivot points to ensure smooth operation and prevent corrosion.
- 저장: Store the wrench in a dry environment to prevent rust. Avoid storing it in damp 부식성 화학 물질에 노출될 수 있는 환경이나 조건.
- 점검: Regularly inspect the jaws for wear or damage. Worn teeth can reduce gripping effectiveness and should be addressed.
5. 문제 해결
If you encounter issues with your pipe wrench, consider the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Wrench slips on pipe/nut. | Jaws not tightened sufficiently; worn teeth; incorrect wrench size for object. | Ensure jaws are tightly adjusted. Inspect teeth for wear and replace if necessary. Use the correct size wrench for the application. |
| Adjustment nut is stiff or difficult to turn. | Accumulated dirt/debris; lack of lubrication; minor corrosion. | Clean the adjustment mechanism thoroughly. Apply a light machine oil to the screw threads. |
| Tool shows signs of rust. | Exposure to moisture or corrosive environments. | Clean off rust with a wire brush or rust remover, then apply a protective oil coating. Store in a dry place. |
6. 사양
Technical specifications for the KNIPEX 83 10 020 90° Pipe Wrench:
| 기인하다 | 세부 사항 |
|---|---|
| 모델 번호 | 83 10 020 |
| 상표 | 니펙스 |
| 재료 | 크롬 바나듐 스틸 |
| 품목 길이 | 560 밀리미터 |
| 품목 무게 | 1.32파운드(약 0.6kg) |
| 턱 각도 | 90° |
| Jaw Capacity (Spannweite) | 70mm (XNUMXmm) |
| 마무리 유형 | 파우더 코팅 |
| 색상 | 빨간색 |
| 작동 모드 | 수동 |
7. 보증 정보
KNIPEX tools are manufactured to high-quality standards. For specific warranty details, please refer to the warranty documentation included with your purchase or visit the official KNIPEX website. General warranties typically cover defects in materials and workmanship under normal use.
8. 고객 지원
For further assistance, technical support, or inquiries regarding your KNIPEX 83 10 020 pipe wrench, please contact KNIPEX customer service through their official web사이트 또는 제품 포장에 제공된 연락처 정보를 참조하세요. 또한 KNIPEX Store on Amazon 더 많은 제품 정보를 보려면.