Woods L-949 Rechargeable Solar Shed Light Instruction Manual

소개

The Woods L-949 Rechargeable Solar Shed Light provides flexible illumination for various spaces such as sheds, garages, and workshops. This solar-powered light features 10 super bright LED bulbs, delivering 30 lumens of brightness. Its design allows for mounting the light unit up to 16 feet away from the solar panel, ensuring optimal sunlight exposure for charging and convenient placement of the light.

제품 특징

• Long-Lasting LED Light: Equipped with LEDs designed for 100,000 hours of service, providing many years of use without bulb replacement.
• 다양한 장착: The solar shed light can be mounted on a wall or pole up to 16 feet away from the solar panel, offering installation flexibility.
• 이중 작동 모드: Features two settings: full brightness with 10 LEDs (approximately 2 hours of illumination) or half brightness with 5 LEDs (approximately 4 hours of illumination).
• 확장된 도달 범위: Includes a 16-foot extension cord, allowing the solar panel to be positioned in areas receiving maximum sunlight while the light is placed where needed.
• 밝은 조명: 10 LED bulbs provide 30 lumens of brightness for clear and secure lighting.

패키지 내용

설치를 시작하기 전에 모든 구성품이 있는지 확인하십시오.

• 1 x Woods L-949 Solar Shed Light Unit (with 10 LED bulbs)
• 1 x 솔라 패널
• 1 x 16-Foot Extension Cord
• 설치용 하드웨어(나사, 앵커 등 - 구체적인 품목은 다를 수 있음)

안전 정보

설치 및 사용 전에 모든 지침을 주의 깊게 읽으십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.

• 제품을 개조하거나 분해하지 마십시오. 보증이 무효화되고 안전 위험이 발생할 수 있습니다.
• 최적의 충전을 위해 태양광 패널은 직사광선을 최대한 많이 받을 수 있는 위치에 설치해야 합니다.
• Keep the solar panel and light unit clean and free from debris to maintain performance.
• This product is water-resistant, but not submersible. Avoid prolonged exposure to heavy rain or submersion in water.
• When drilling holes for mounting, be aware of any hidden electrical wiring or plumbing.

설정 및 설치

Follow these steps to install your solar shed light:

1. 태양광 패널 설치 위치를 선택하세요: Select an outdoor location for the solar panel that receives at least 6-8 hours of direct sunlight daily. Avoid shaded areas from trees, buildings, or other obstructions.
2. 태양 전지판 장착: Use the provided mounting hardware to securely attach the solar panel to a wall, roof, or pole. Angle the panel to maximize sun exposure.
3. Choose a Location for the Light Unit: Decide where you want the light unit inside your shed, garage, or other desired area. The 16-foot extension cord allows for flexible placement.
4. 조명 장치를 설치하세요: Securely attach the light unit to a wall or ceiling using the appropriate mounting hardware. Ensure it is positioned to illuminate the desired area effectively.
5. Connect the Extension Cord: Plug the extension cord from the solar panel into the light unit. Ensure the connection is secure.
6. 초기 청구 : Allow the solar panel to charge the light's internal batteries for at least 24-48 hours in direct sunlight before first use. This ensures optimal battery performance.

Image: The solar panel component, designed for outdoor mounting to capture sunlight.

Image: The Woods L-949 solar shed light unit mounted on a wooden beam, showing its pull chain.

작동 지침

The Woods L-949 Solar Shed Light is operated via a pull chain switch located on the light unit.

1. 켜기/끄기: Pull the chain once to turn the light on. Pull it again to cycle through the brightness settings or turn it off.
2. 밝기 설정:
   • 첫 번째 풀: Activates 10 LED bulbs for full brightness (approx. 30 lumens, 2 hours of illumination on a full charge).
   • 두 번째 풀: Activates 5 LED bulbs for half brightness (approx. 4 hours of illumination on a full charge).
   • 세 번째 풀: 조명을 끕니다.

Image: A user demonstrating the pull chain operation of the solar shed light.

유지

Regular maintenance ensures the longevity and optimal performance of your solar shed light.

• 태양광 패널 청소: 부드러운 천으로 태양광 패널 표면을 주기적으로 닦아주세요.amp 먼지, 오물 및 이물질을 제거하는 천입니다. 패널이 깨끗해야 효율적인 충전이 가능합니다.
• 연결 검사: Occasionally check the connection between the solar panel and the light unit to ensure it remains secure and free from corrosion.
• 배터리 교체: The light uses rechargeable batteries. Over time, battery performance may decrease. If the light duration significantly shortens, consider replacing the internal rechargeable batteries. Refer to the product's internal battery type (often Ni-Cd or NiMH) and replace with equivalent specifications.

문제 해결

If your solar shed light is not functioning as expected, try these troubleshooting steps:

명세서

보증 및 지원

제조업체 보증: 없음.

For additional product information or support, please visit the 아마존의 우즈 스토어.