theben ELPA 8

Theben ELPA 8 Stair Light Timer Switch

Model: ELPA 8 | Brand: Theben

1. 서론

The Theben ELPA 8 is an electromechanical stair light timer switch designed for automatic control of lighting in staircases and other common areas. It features a durable synchronous motor drive for reliable operation and a 0 W standby consumption for energy efficiency. The device is designed for DIN rail mounting and includes a rotary wheel for time setting and a toggle switch for continuous light functionality.

2. 안전 지침

WARNING: Electrical shock hazard. Installation and maintenance must be performed by a qualified electrician in accordance with all local and national electrical codes and regulations.

  • 기기를 설치하거나 수리하기 전에 항상 주 회로 차단기에서 전원을 차단하십시오.
  • Ensure proper grounding and wiring connections as indicated in the wiring diagram.
  • Do not exceed the specified electrical load limits for the switch.
  • 장치가 손상된 것으로 보이면 작동하지 마세요.
  • 기기를 습기와 극한 온도에 두지 마세요.

3. 제품 오버view

The Theben ELPA 8 is a compact, electromechanical timer switch for controlling lighting circuits. Its design allows for easy integration into standard electrical distribution boards.

Theben ELPA 8 Stair Light Timer Switch front view with wiring diagram and settings dial

그림 1: 전면 view of the ELPA 8 switch, showing the wiring terminals, time setting dial, and continuous light toggle.

내부 view of the Theben ELPA 8 switch, showing the electromechanical components

그림 2: 내부 view of the ELPA 8, highlighting its electromechanical mechanism.

4. 포함된 구성 요소

제품 패키지에는 다음이 포함됩니다.

  • One (1) Theben ELPA 8 Stair Light Timer Switch (Item Number 0080002)
Theben ELPA 8 Stair Light Timer Switch with its retail packaging

Figure 3: The ELPA 8 switch alongside its packaging.

5. 설정 및 설치

5.1 장착

The ELPA 8 is designed for quick and easy installation on a standard DIN rail within an electrical distribution board. Ensure the DIN rail is securely mounted and accessible for wiring.

Theben ELPA 8 Stair Light Timer Switch mounted on a DIN rail

Figure 4: The ELPA 8 switch correctly mounted on a DIN rail.

5.2 배선

Installation must be performed by a qualified electrician in accordance with local wiring regulations. The device supports a 4-wire connection. Refer to the wiring diagram printed on the device (Figure 1) for correct connections.

  • L: 실시간 입력
  • N: 중립 입력
  • 3: Push-button input (for triggering the timer)
  • 4: Switched output (to the lighting circuit)

느슨한 접촉과 잠재적 위험을 방지하기 위해 모든 연결 부분이 단단하고 안전한지 확인하세요.

6. 사용 설명서

6.1 시간 설정

The desired lighting duration can be set using the blue rotary wheel on the front of the device. Rotate the wheel to align the desired time (in minutes) with the indicator mark. The scale provides an absolute time setting, typically ranging from 0.5 to 7 minutes.

Close-up of the Theben ELPA 8 time setting dial and continuous light toggle

Figure 5: Close-up of the time setting dial and toggle switch.

6.2 Continuous Light Function

The ELPA 8 features a practical toggle switch located above the time setting dial. In the 'light bulb' position, the timer function is active, and the light will switch off after the set duration. Moving the toggle to the 'sun' position activates continuous light, bypassing the timer. The light will remain on until the toggle is returned to the 'light bulb' position to re-enable timer operation.

7. 유지관리

The Theben ELPA 8 is designed for maintenance-free operation. To ensure longevity and proper function:

  • Ensure the device is kept clean and free from dust.
  • Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.
  • For any issues requiring internal inspection or repair, consult a qualified electrician.

8. 문제 해결

If the stair light timer switch is not functioning as expected, consider the following:

  • 빛 없음: Check the power supply to the device and ensure all wiring connections are secure and correct according to the diagram (Figure 1). Verify that the light bulb(s) in the circuit are functional.
  • 조명이 계속 켜져 있습니다: Check the position of the continuous light toggle switch. Ensure it is set to the timer function (light bulb icon) and not the continuous light function (sun icon).
  • 잘못된 타이밍: Re-adjust the rotary wheel to the desired time setting. Ensure the wheel is not obstructed.
  • Device Not Responding to Push-button: Ensure the push-button input (terminal 3) is correctly wired and the push-button itself is functional. Test the push-button for continuity if possible.

If problems persist after checking these points, contact a qualified electrician for further assistance.

9. 사양

9.1 일반 사양

특징사양
모델ELPA 8
품목 번호0080002
공급량tage230V 교류
스위칭 용량16A, 230VAC
대기 소비량0와트
시간 설정 범위Adjustable via rotary wheel (e.g., 0.5 to 7 minutes)
장착 유형DIN 레일
재료플라스틱, 금속
색상하얀색
품목 무게0.08 킬로그램
필요한 배터리아니요
용도상업적 및 개인적 용도

9.2리터amp 부하 용량

The maximum load capacity varies depending on the type of lamp connected. Adhere to the following guidelines:

Table showing lamp load capacities for Theben ELPA 8 switch

그림 6: Lamp load capacities for the ELPA 8 switch.

Lamp 유형최대 부하
LED 엘amp < 2 와트30와트
LED 엘amp > 2와트300와트
형광등 Lamps (EVG)600와트
Incandescent / Halogen Lamps2300와트
소형 형광 Lamps150와트

10. 보증 및 지원

The Theben ELPA 8 Stair Light Timer Switch comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Theben website. For technical assistance, service, or professional installation, please consult a qualified electrician or contact Theben customer support directly.

© 2023 Theben AG. 모든 권리 보유. 정보는 예고 없이 변경될 수 있습니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.