MINI 82110035953

MINI Cooper UV Sunshade Instruction Manual

Models: R50, R52, R53, R55, R56, R57 | Part Number: 82110035953

1. 제품 오버view

The MINI Cooper UV Sunshade is a genuine OEM accessory designed to protect your vehicle's interior from harmful UV rays and reduce cabin temperatures. Manufactured from durable polyester and vinyl materials, this foldable sunshade is engineered to fit the windshields of specific MINI Cooper models, ensuring optimal coverage and performance.

This sunshade is a custom-fit solution, designed to meet the exact specifications for fit, form, and function for your MINI vehicle.

MINI Cooper UV Sunshade unfolded, showing the MINI logo

Image 1.1: The MINI Cooper UV Sunshade in its unfolded state, featuring the MINI logo prominently.

2. 설정 지침

  1. Unfolding the Sunshade: Carefully remove the sunshade from its storage case. The sunshade is designed to unfold into a rigid, multi-panel structure.
  2. Positioning in Windshield: Place the unfolded sunshade against the interior of your vehicle's windshield. Ensure the reflective side faces outwards towards the sun. The sunshade is custom-shaped to fit the contours of the MINI windshield.
  3. Adjusting Around Rearview 거울: Due to its rigid design, you may need to slightly maneuver the sunshade around the rearview mirror assembly. It may be necessary to temporarily adjust the rearview mirror's position to properly seat the sunshade. Re-adjust the mirror once the sunshade is in place.
  4. Securing with Sun Visors: Lower your vehicle's sun visors to hold the sunshade firmly against the windshield. For a more secure fit and to minimize light gaps, unclip the visors from their central clips and pull them down slightly to press against the sunshade more tightly. This helps to hold the sunshade snugly in place.
MINI Cooper UV Sunshade installed in a car windshield

Image 2.1: The MINI Cooper UV Sunshade correctly installed in a vehicle's windshield, secured by the sun visors.

3. 사용 설명서

To use the MINI Cooper UV Sunshade, follow the setup instructions daily when parking your vehicle in direct sunlight. When not in use, the sunshade is designed for convenient storage.

  1. 전개: Unfold the sunshade and place it against the windshield, securing it with the sun visors as described in the Setup section.
  2. 제거: Release the sun visors, carefully remove the sunshade from the windshield, and fold it back into its compact form.
  3. 저장: Place the folded sunshade into the provided storage case. The compact size allows for storage in the backseat, seat-back pockets, or trunk of your MINI.
MINI Cooper UV Sunshade folded and stored in its protective case

Image 3.1: The MINI Cooper UV Sunshade folded and placed inside its dedicated storage case.

4. 유지관리

Proper care will extend the life and effectiveness of your UV sunshade.

  • 청소: The sunshade is made of polyester and vinyl. To clean, wipe the surfaces with a soft, damp 깨끗한 천으로 닦아주세요. 잘 지워지지 않는 얼룩은 순한 비눗물을 사용한 후 깨끗한 천으로 닦아내면 됩니다.amp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 소재를 손상시킬 수 있으므로 사용하지 마세요.
  • 건조: Allow the sunshade to air dry completely before folding and storing to prevent mildew or odors.
  • 저장: Always store the sunshade in its provided case when not in use. This protects it from dust, dirt, and potential damage, maintaining its appearance and structural integrity.

5. 문제 해결

  • Sunshade Does Not Fit Perfectly: While designed for a custom fit, minor variations in windshields or installation technique can occur. Ensure the sunshade is centered and fully extended. Adjusting the sun visors as described in the Setup section (unclipping and pulling down) can often improve the fit and reduce gaps. A small gap at the very top, often obscured by the rearview mirror or rain sensor, is normal for some installations.
  • 접기/펼치기 난이도: The sunshade has a rigid, multi-panel design. If you experience difficulty, ensure you are folding along the pre-defined creases. Do not force the sunshade, as this may cause damage.
  • 감소된 효과: Ensure the reflective side is facing outwards. If the sunshade appears less effective, check for any large gaps around the edges or obstructions that might be preventing full coverage.

6. 사양

상표미니
부품 번호82110035953
호환 모델MINI Cooper R50, R52, R53, R55, R56, R57
색상
재료폴리에스터, 비닐
폐쇄 유형접이식
접힌 치수(대략)30.75인치 길이 x 8인치 너비

7. 보증 및 지원

This product is a genuine MINI OEM part. For specific warranty information or technical support, please refer to the documentation provided with your vehicle or contact an authorized MINI dealership or service center. You can also visit the official MINI web고객 지원 자료를 위한 사이트입니다.

For further assistance, please contact MINI customer service directly.

© 2024 MINI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.