OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp 사용 설명서

1. 서론

Thank you for choosing the OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp. This instruction manual provides important information for the safe and efficient use of your product. Please read this manual carefully before installation and retain it for future reference. This lamp is designed to provide beautiful, soft light, primarily for mirror lighting applications.

중요한 안전 정보: Always ensure the power supply is disconnected before installing or replacing the lamp. Use only in luminaires approved for this type of lamp. 이 lamp is not shockproof and is not suitable for use in ovens or refrigerators.

2. 제품 오버view

이미지 1: The OSRAM Special LINESTRA S14d 35W 230V Opal Tubular Lamp. This image shows the elongated, cylindrical shape of the lamp with its S14d base connector. The lamp features an opal finish for diffused light.

The OSRAM Special LINESTRA lamp is a tubular incandescent lamp with an S14d base. It is designed for specific lighting fixtures, often found in bathrooms or decorative applications where linear light sources are preferred. Its opal finish ensures a uniform and glare-free light distribution.

3. 설치 및 설정

1. 안전이 최우선입니다. Before attempting any installation, ensure the power supply to the fixture is completely switched off at the main circuit breaker.
2. 호환성 확인: Verify that your lighting fixture is designed for an S14d base and can safely accommodate a 35W, 230V lamp. Refer to your fixture's manual for specifications.
3. L 포장 풀기amp: 조심스럽게 l을 제거amp from its packaging. Handle the lamp by its base or ends to avoid touching the glass surface directly, as oils from your skin can reduce lamp 삶.
4. L을 삽입amp: Align the S14d base pins with the corresponding slots in the lamp holder. Gently push and slide the lamp into place until it is securely seated. Do not force the lamp.
5. 복원력 : 일단 내가amp is securely installed, restore power to the fixture at the main circuit breaker.
6. 테스트 작업: Switch on the light to confirm proper installation and functionality.

주의: 최대 와트를 초과하지 마십시오tage specified for your lighting fixture. Overloading can cause overheating and fire hazards.

4. 사용 설명서

The OSRAM Special LINESTRA lamp operates like a standard incandescent bulb. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

• 켜기/끄기: Use the wall switch or the switch integrated into your lighting fixture to turn the lamp 켜기 또는 끄기.
• 용도: 이 lamp is primarily intended for indoor use, particularly for mirror lighting and other decorative applications where a linear light source is desired.

5. 유지관리

• 청소: l을 확인하세요amp 청소하기 전에 차갑고 전원이 꺼져 있는지 확인하십시오. 바닥을 닦으십시오.amp gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the lamp표면 또는 내부 구성 요소.
• Lamp 대사: l 때amp reaches the end of its life (average nominal lifetime is 1000 hours), it will cease to function. To replace it, follow the installation steps in Section 3, ensuring the power is off before removing the old lamp and installing a new one. Dispose of old lamp현지 규정에 따라.

6. 문제 해결

문제 해결 단계를 시도해도 문제가 해결되지 않으면 고객 지원 센터 또는 자격을 갖춘 전기 기술자에게 문의하십시오.

7. 사양

8. 안전 정보

• 전기적 위험: Always disconnect power before installing, removing, or cleaning the lamp.
• 열: 백열등 lamps generate heat. Do not touch the lamp when it is operating or immediately after it has been switched off. Allow it to cool down before handling.
• 고정물 호환성: 이것을 사용하세요amp only in fixtures specifically designed for S14d base tubular lamps 및 l에 대해 등급이 지정됨amp의 와트tage 및 voltage.
• 파손: 이 lamp is not shockproof. Handle with care to prevent breakage. If the lamp breaks, carefully clean up glass fragments.
• 처분: 사용한 리터 폐기amp현지 환경 규정에 따라.

9. 보증 및 지원

For warranty information or technical support, please refer to the official OSRAM web사이트를 방문하거나 판매점에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

Visit OSRAM Official Web대지