1. 제품 오버view
The AGS BL512 is a domestic steel line designed for use in brake, fuel, and transmission systems. This durable component is engineered to provide reliable fluid transfer within automotive applications.
- 유형: Brake Hydraulic Line
- 부품 번호: 077146359156
- 패키지 크기: 1.27 H x 0.762 L x 33.02 W(센티미터)
- 패키지 무게: 0.009킬로그램
Figure 1: The AGS BL512 steel line, showing its robust construction and threaded fittings at each end, suitable for various automotive fluid transfer applications.
2. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 에이지에스(AGS) |
| 재료 | 강철 |
| 색상 | 은 / 회색 |
| 제품 치수 | 13"L x 13"W (as packaged) |
| 품목 무게 | 0.32온스(약 0.009kg) |
| 공칭 벽 두께 | 1.3개월 (Note: This value may indicate a data anomaly and typically refers to a physical measurement unit.) |
| 외경 | 0.75 인치 |
| 품목 길이 | 33.02 센티미터(약 13인치) |
| 한국어: | 077146359156 |
| 제조업체 부품 번호 | BL-512 |
3. 설정 및 설치
Proper installation of the AGS BL512 line is crucial for safety and performance. This product is intended for professional installation or by individuals with significant automotive repair experience.
3.1 안전 예방 조치
- 안전 안경과 장갑 등 적절한 개인 보호 장비(PPE)를 항상 착용하세요.
- 차량 하부에서 작업하기 전에 잭 스탠드나 리프트를 사용하여 차량을 안전하게 고정하십시오.
- 전기 부품 근처에서 작업할 경우 차량 배터리를 분리하십시오.
- Be aware of hot engine components and exhaust systems.
- Handle brake fluid, fuel, and transmission fluid with care, as they can be corrosive or flammable. Dispose of fluids properly.
3.2 필요한 도구 및 재료
- Line wrenches or flare nut wrenches (to prevent rounding off fittings)
- Tubing bender (if custom bends are required)
- Tubing cutter (if custom length is required)
- Flaring tool (if custom flares are required)
- Brake fluid, transmission fluid, or fuel (as applicable)
- Drain pans and rags
3.3 설치 단계(일반)
- 준비: Identify the old line to be replaced. Clean the surrounding area to prevent contamination.
- 제거: Carefully disconnect the old line from its fittings. Be prepared for fluid leakage. Note the routing of the original line.
- Forming (if necessary): If the new line needs to be bent to match the original routing, use a tubing bender to create smooth, gradual bends. Avoid kinking the line.
- 설치: Route the new AGS BL512 line in the same path as the original. Secure it with appropriate clips or fasteners.
- 연결: Connect the ends of the new line to the corresponding fittings. Hand-tighten first, then use a line wrench to tighten securely, but do not overtighten.
- Fluid System Specifics:
- 브레이크 라인: After installation, bleed the brake system thoroughly to remove all air. Check for leaks.
- 연료관: Check all connections for leaks before starting the engine.
- Transmission Lines: Refill transmission fluid to the correct level and check for leaks.
- 최종 검사: Double-check all connections for tightness and ensure the line is not rubbing against any moving parts or sharp edges.
4. 운영 고려 사항
Once installed, the AGS BL512 line operates as an integral part of your vehicle's fluid transfer system. Its function is passive, ensuring the safe and efficient flow of brake fluid, fuel, or transmission fluid as intended by the vehicle manufacturer.
No direct user operation is required for the line itself after proper installation and system bleeding/filling. The line is designed to withstand the pressures and temperatures typical of its intended automotive applications.
5. 유지관리
The AGS BL512 steel line is a durable component designed for long service life. Regular inspection is recommended as part of routine vehicle maintenance to ensure continued safety and performance.
5.1 점검 일정
- Inspect the line during routine oil changes or other under-vehicle inspections.
- Check immediately if you notice any signs of fluid leaks, spongy brakes, or unusual odors (like fuel).
5.2 무엇을 살펴봐야 할까요?
- 누출: Any visible fluid weeping or dripping around the line or its connections.
- 부식: Significant rust or corrosion on the line, especially in areas exposed to road salt or moisture.
- 손상: Kinks, dents, cracks, or abrasions on the line.
- 느슨한 연결: Ensure all fittings are tight and secure.
If any issues are detected, it is critical to address them promptly. A compromised brake, fuel, or transmission line can lead to serious safety hazards or vehicle damage. Replacement of the affected line is typically the recommended course of action.
6. 문제 해결
Troubleshooting issues related to the AGS BL512 line primarily involves identifying and addressing leaks or blockages. Given its passive role, most problems stem from improper installation or physical damage.
6.1 일반적인 문제 및 해결 방법
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 연결 부위에서 유체 누출 발생 | Loose fitting, damaged flare, cross-threaded connection | Tighten fitting (do not overtighten). If leak persists, inspect flare and fitting for damage. Replace line or fitting if damaged. Ensure correct threading. |
| Fluid Leak Along Line | Corrosion, physical damage (kink, crack, abrasion) | Replace the damaged section of the line or the entire line. |
| Restricted Fluid Flow (e.g., weak brakes, fuel starvation) | Kinked line, internal blockage (rare for new lines) | Inspect the line for kinks. If kinked, replace. If blockage is suspected, flush or replace the line. |
For any persistent or severe issues, it is highly recommended to consult a qualified automotive technician.
7. 보증 및 지원
For specific warranty information regarding the AGS BL512 Domestic Steel Brake/Fuel/Transmission Line, please refer to the documentation provided with your purchase or visit the official AGS web사이트. 보증 약관은 일반적으로 제조상의 결함을 포함합니다.
If you require technical assistance or have questions about the product, please contact AGS customer support through their official channels. Contact information can usually be found on the product packaging or the manufacturer's web대지.
AGS Official Web대지: www.agscompany.com (참고: 이것은 플레이스홀더입니다. URL실제 공식 정보를 확인해 주세요. website for AGS)