Pyramid WH12

Pyramid WH12 12 Inch Car Subwoofer Speaker Instruction Manual

모델: WH12

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your Pyramid WH12 12-inch car subwoofer speaker. The WH12 is designed to deliver powerful bass and clear audio performance for your car audio system. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your speaker.

2. 제품 특징

  • 500와트 출력: Features a maximum power output of 500 watts peak power / 250 watts RMS for robust audio performance.
  • Cloth Edge Suspension: Equipped with a durable cloth edge suspension for enhanced woofer enclosure system performance.
  • 1.5 Inch Kapton Voice Coil: Incorporates a 1.5-inch Kapton bobbin voice coil and an 8-ohm impedance rating to minimize distortion and deliver clear sound.
  • 12 Inch Paper Cone: Standard 12-inch high-powered paper cone driver, suitable for new installations or replacing existing speakers.
  • 25 oz Magnet Structure: Features a 25 oz magnet structure within a heavy-duty housing, providing a strong foundation and excellent sound.
  • 장착 깊이: Designed with a 4.50-inch mounting depth for straightforward installation.

3. 안전 정보

제안 65 경고: 이 제품에는 캘리포니아주에서 암, 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다. 자세한 내용은 다음 웹사이트를 방문하세요. www.P65Warnings.ca.gov.

Always ensure proper ventilation around the subwoofer. Avoid exposing the speaker to excessive moisture or extreme temperatures. Disconnect power before performing any installation or maintenance.

4. 설정 및 설치

올바른 설치는 최적의 성능과 안전을 위해 매우 중요합니다. 설치 과정에 대해 확신이 서지 않는다면 전문 카 오디오 설치 기사에게 문의하십시오.

4.1 풀기

Carefully remove the subwoofer from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain the packaging for future transport or service needs.

4.2 장착

The Pyramid WH12 subwoofer requires a mounting depth of 4.50 inches. Ensure that the chosen mounting location in your vehicle or enclosure provides adequate space and structural integrity to support the speaker.

위에서 아래로 view of the Pyramid WH12 subwoofer, showing the black cone, 'Studio PRO' branding, and connection terminals.

그림 1: 상향식 view of the Pyramid WH12 subwoofer.

4.3 배선 연결

The WH12 subwoofer has an impedance of 8 ohms. Connect the speaker to a compatible amplifier or head unit. Pay close attention to polarity to ensure correct phase and optimal sound reproduction.

  • Identify the positive (+) and negative (-) terminals on the subwoofer and your amp리퍼.
  • When looking at the back of the speaker with the connections at the 6 o'clock position, the negative terminal is typically on the left. Confirm this with your specific unit.
  • Use appropriate gauge speaker wire for your installation to prevent power loss and ensure safety.
앞쪽 view of the Pyramid WH12 subwoofer cone, showing the black paper cone and 'Studio PRO' dust cap.

그림 2: 전면 view of the Pyramid WH12 subwoofer cone.

5. 사용 설명서

Once installed, the Pyramid WH12 subwoofer is ready for operation.

  • 전원 켜기: 자동차 오디오 시스템을 켜세요.
  • 볼륨 조절: Start with the volume at a low level and gradually increase it to your desired listening level. Avoid operating the subwoofer at excessively high volumes for extended periods to prevent damage.
  • 오디오 설정: Adjust the bass and subwoofer output settings on your head unit or amplifier to achieve balanced sound. The WH12 is designed to enhance the low-frequency response of your music.
  • 침입 기간: Allow for a break-in period of several hours of moderate use. This allows the speaker's suspension components to loosen and perform optimally.

6. 유지관리

정기적인 유지 관리는 서브우퍼의 수명과 성능을 보장하는 데 도움이 됩니다.

  • 청소: Use a soft, dry cloth to wipe down the speaker cone and frame. Avoid using harsh chemicals or abrasive cleaners.
  • 점검: Periodically check the speaker for any signs of wear or damage, especially to the cone and suspension. Ensure all mounting screws are secure.
  • 환경 보호: Protect the subwoofer from direct sunlight, extreme temperatures, and moisture, which can degrade materials over time.

7. 문제 해결

If you experience issues with your Pyramid WH12 subwoofer, refer to the following common troubleshooting steps:

문제가능한 원인해결책
서브우퍼에서 소리가 나지 않습니다
  • 느슨하거나 잘못된 배선 연결
  • Amp앰프 전원이 켜지지 않았거나 고장났습니다.
  • 헤드 유닛 설정이 잘못되었습니다.
  • Check all wiring for secure and correct polarity connections.
  • 확인하다 amp앰프의 출력 및 기능.
  • 헤드 유닛에서 서브우퍼 출력이 활성화되어 있고 볼륨이 충분히 큰지 확인하십시오.
왜곡되거나 불분명한 소리
  • 볼륨이 너무 높음
  • 잘못된 amp리파이어 게인 설정
  • 스피커 콘 또는 보이스 코일 손상
  • 볼륨을 적당한 수준으로 줄이세요.
  • 조정하다 amp앰프 게인 설정은 제조사 권장 사항에 따라 하십시오.
  • 스피커에 물리적 손상이 있는지 점검하십시오. 손상된 경우 교체가 필요할 수 있습니다.
Rattling or popping noises
  • 느슨한 장착
  • Internal speaker defect
  • Enclosure vibration
  • Ensure the subwoofer is securely mounted and all screws are tightened.
  • Check the enclosure for loose panels or components that might be vibrating.
  • If the issue persists, the speaker may have an internal defect requiring professional inspection.

8. 사양

특징세부 사항
모델명회춘색
스피커 유형서브우퍼, 우퍼
서브우퍼 직경12 인치
재료종이
피크 전력 출력500 와트
RMS 전원 출력250 와트
임피던스8옴
음성 코일1.5 Inch Kapton Bobbin
자석 구조25 온스
장착 깊이4.50 인치
제품 크기(D x W x H)12.4인치 깊이 x 12.4인치 너비 x 5.24인치 높이
무게3.2킬로그램(약 7파운드)
연결 기술열광한
추천 용도음악
제조업체주변 소리

9. 보증 및 지원

The Pyramid WH12 subwoofer comes with a manufacturer's limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Pyramid customer support.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Pyramid customer support through their official web구매 시 제공된 사이트 또는 연락처 정보.

제조업체: 주변 소리

© 2024 피라미드. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.