BELL SpinFit Calorie Bike Speedometer User Manual

1. 제품 오버view

The BELL SpinFit Calorie Bike Speedometer is designed to track your cycling performance, including speed and calories burned. It features an extra-large, easy-to-read two-color display for clear visibility during your rides.

주요 특징:

• Measures current speed, average speed, and maximum speed.
• Calculates calories burned during your ride.
• Tracks distance, timer, and total odometer.
• Includes a clock function.
• Features current-to-average speed comparison.
• Automatic start/stop functionality.
• Offers basic and advanced display modes.
• Supports US (miles) or Metric (kilometers) units.
• Battery indicator for power status.
• Quick trip reset function.
• Tool-free handlebar mount for easy installation.

그림 1.1: The Bell SpinFit Calorie Bike Speedometer. This image shows the speedometer unit attached to a bicycle handlebar, displaying its large, two-color screen.

2. 설정 및 설치

Follow these steps to properly install your BELL SpinFit Calorie Bike Speedometer.

2.1 패키지 내용

• Speedometer Unit
• 핸들바 마운트
• 휠 자석
• Sensor Unit (wired)
• 배터리 (사전 설치 또는 별도 구매)
• Cable Ties for securing the sensor wire

2.2 배터리 설치

The speedometer requires one Alkaline battery. If not pre-installed, open the battery compartment on the back of the unit, insert the battery with the correct polarity, and close the compartment securely.

2.3 Handlebar Mount Installation

1. Position the handlebar mount on your bicycle's handlebar.
2. Secure the mount using the integrated strap or clamp mechanism. No tools are required for this step.
3. Ensure the mount is stable and does not rotate freely.

2.4 센서 및 자석 설치

1. Attach the sensor unit to the front fork of your bicycle using the provided cable ties. Position it so that the sensor head is aligned with the spokes.
2. Attach the wheel magnet to a spoke on your front wheel.
3. Adjust the position of the sensor and magnet so that they are approximately 2-5 mm apart when the wheel rotates. The magnet should pass directly in front of the sensor head.
4. Route the sensor wire along the fork and up to the handlebar mount, securing it with cable ties to prevent it from interfering with moving parts.
5. Plug the sensor wire into the designated port on the handlebar mount.

중요한: Proper spacing between the sensor and magnet is crucial for accurate readings. Test by spinning the wheel to ensure the speedometer registers movement.

3. 사용 설명서

The BELL SpinFit speedometer features multiple functions accessible via its buttons. Refer to the display for current readings and settings.

3.1 초기 설정 및 휠 크기

Upon first use or after battery replacement, you may need to set the wheel circumference. This is essential for accurate speed and distance measurements. Consult the specific instructions provided with your unit for entering the correct wheel size (in mm or inches) based on your tire dimensions.

3.2 기능 종료view

The speedometer cycles through various functions. Use the primary button (usually on the front or bottom) to switch between modes.

• 속도: 현재의 주행 속도를 표시합니다.
• 소모된 칼로리: Estimates calories expended during the current ride.
• 거리: 현재 이동 경로를 보여줍니다.
• 시간제 노동자: Records the duration of the current ride.
• 주행거리계: 총 누적 거리를 표시합니다.
• 평균 속도: 현재 이동의 평균 속도를 보여줍니다.
• 최대 속도: 이번 여정에서 달성한 최고 속도를 기록합니다.
• 시계: Displays the current time (12-hour or 24-hour format).
• Current-to-Average Speed Comparison: An arrow indicator shows if your current speed is above or below your average speed.
• 자동 시작/정지: The unit automatically begins recording when movement is detected and pauses when stationary.
• Basic/Advanced Display: Allows switching between simplified and detailed data views.
• US or Metric Units: Select between miles/mph or kilometers/km/h.
• 배터리 표시기: 배터리 잔량을 표시합니다.
• Quick Trip Reset: Resets current trip data (distance, timer, average/max speed, calories) without affecting the odometer.

3.3 Setting the Clock and Units

Typically, a secondary button or a long press on the primary button will allow you to enter settings mode. From here, you can adjust the clock, select US or Metric units, and configure other preferences. Follow the on-screen prompts.

3.4 주행 데이터 재설정

To clear data for a new ride, use the "Quick Trip Reset" function. This usually involves a specific button press combination or a long press on a designated button while in a trip-related display mode.

4. 유지관리

Proper maintenance ensures the longevity and accuracy of your speedometer.

4.1 배터리 교체

When the battery indicator shows low power, replace the Alkaline battery promptly. Open the battery compartment on the back of the unit, remove the old battery, insert a new one with correct polarity, and secure the cover. Dispose of old batteries responsibly.

4.2 청소

Wipe the speedometer unit with a soft, damp 천. 연마성 세제나 용제는 디스플레이나 c를 손상시킬 수 있으므로 사용하지 마십시오.asing. 사용 전에 제품이 완전히 건조되었는지 확인하십시오.

4.3 보관

If storing the speedometer for an extended period, it is recommended to remove the battery to prevent leakage and potential damage to the unit.

5. 문제 해결

If you encounter issues with your speedometer, try the following solutions:

5.1 Speedometer Not Displaying Readings

• 배터리 확인: 배터리가 올바르게 설치되었고 충전량이 충분한지 확인하세요. 필요한 경우 교체하세요.
• 센서/자석 정렬: Verify that the wheel magnet passes within 2-5 mm of the sensor head. Adjust their positions if needed.
• 센서 연결: Ensure the sensor wire is securely plugged into the handlebar mount.
• 휠 둘레: Confirm that the correct wheel circumference is set in the speedometer's settings. Incorrect settings can lead to inaccurate or no readings.

5.2 부정확한 판독값

• 휠 둘레: Double-check the wheel circumference setting. An incorrect value will result in inaccurate speed and distance.
• 자석 위치: Ensure the magnet is firmly attached to the spoke and does not shift during rides.
• 간섭: Strong electromagnetic fields from other devices might interfere with the signal. Try to isolate the speedometer from such sources.

5.3 Display Issues (Gibberish, Blank Screen)

• 배터리: A low or depleted battery can cause display anomalies. Replace the battery.
• 재설정 : Some units have a small reset button (often requiring a pin to press). Refer to your specific model's instructions for a hard reset.

6. 사양

7. 보증 및 지원

For warranty information or technical support regarding your BELL SpinFit Calorie Bike Speedometer, please contact BELL customer service directly. Refer to the product packaging or the official BELL web최신 연락처 정보와 보증 조건은 사이트에서 확인하세요.

제조업체: 벨

Web대지: www.bellsports.com (Note: This is a general placeholder link, please refer to official product documentation for exact support channels.)