소개
The Taylor Mechanical Long Ring Timer is a reliable and easy-to-use device designed for precise time management in various settings, particularly in the kitchen. This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your timer.
주요 특징:
- 60-minute countdown capacity.
- Simple twist-dial operation.
- Loud, 5-second alarm ring.
- Bold black and white graphics for easy readability.
- 내구성 있는 플라스틱 구조.
제품 끝view
The Taylor Mechanical Long Ring Timer features a classic design with a clear, easy-to-read dial. It is compact and designed for convenient placement on any flat surface.
그림 1: 전면 view of the Taylor Mechanical Long Ring Timer.
Figure 2: Dimensions of the Taylor Mechanical Long Ring Timer (3.5"D x 3.5"W x 1.5"H).
설정
Your Taylor Mechanical Long Ring Timer requires no batteries or complex assembly. It is ready for use directly out of the packaging.
- 타이머를 포장에서 꺼냅니다.
- Place the timer on a stable, flat surface where it can be easily seen and heard.
작동 지침
To ensure the alarm rings for the full 5 seconds, it is crucial to wind the timer past the desired time before setting it back. This action fully engages the internal mechanism.
- 타이머를 감으세요: Turn the dial clockwise all the way to the 60-minute mark. This winds the internal spring mechanism.
- 원하는 시간을 설정하세요: Turn the dial counter-clockwise to the desired time setting (e.g., 15 minutes).
- 카운트다운 시작: The timer will begin to tick, counting down the set time.
- 경보: Once the dial reaches the zero mark, the timer will sound a loud, approximately 5-second ring.
중요 참고 사항: Failure to fully wind the timer to 60 minutes before setting the desired time may result in a shorter or no alarm sound.
유지
Proper care will ensure the longevity and accuracy of your timer.
- 청소: 부드러운 d로 타이머를 닦으세요.amp cloth. Do not immerse the timer in water or use abrasive cleaners.
- 저장: Store the timer in a dry place at room temperature.
- 극한의 환경을 피하세요: Do not expose the timer to extreme heat, cold, or humidity, as this may affect its mechanical components.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Timer does not ring or rings for a short duration. | Timer was not fully wound to 60 minutes before setting. | Always turn the dial clockwise to the 60-minute mark, then counter-clockwise to the desired time. |
| Timer is not ticking. | Timer not wound or mechanism is stuck. | Ensure the timer is fully wound. If the issue persists, contact customer support. |
명세서
- 모델 번호: 5831N
- 상표: 테일러
- 재료: 플라스틱
- 색상: 하얀색
- 제품 크기: 1.5인치 깊이 x 3.5인치 너비 x 3.5인치 높이
- 품목 무게: 1.6 온스
- 최대 시간 설정: 60 분
- 알람 지속 시간: 약 5초
- 한국어: 077784058312
보증 및 지원
The Taylor Mechanical Long Ring Timer is covered by a 1년 한정 보증 from the manufacturer, Lifetime Brands Inc. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further assistance, please contact Taylor customer service. Refer to the official Taylor web최신 연락처 정보는 해당 사이트나 제품 포장에서 확인하세요.
About Taylor
For over 170 years, Taylor has been a trusted brand in measurement, known for its commitment to high quality, precision, and innovative designs in kitchen, weather, and bath products. Taylor products are designed for everyday use, delivering dependable and durable performance.
Video: "Taylor - Life Measured" - An overview of the Taylor brand's commitment to precision and quality in various products.