D-Link DGS-1024D 24포트 기가비트 비관리형 스위치 사용 설명서

1. 서론

The D-Link DGS-1024D is a 24-port 10/100/1000Mbps Gigabit Unmanaged Switch designed to provide high-speed network connectivity for small offices and home environments. This fanless switch offers reliable performance, energy efficiency, and ease of use, making it suitable for expanding network capacity without complex configuration.

주요 특징은 다음과 같습니다.

• Gigabit Connectivity: Provides 10/100/1000Mbps speeds on all 24 ports.
• 관리되지 않는 작업: Plug-and-play installation with no software or configuration required.
• 팬리스 디자인: 조용한 작동을 보장하므로 조용한 환경에 적합합니다.
• 에너지 효율성: Incorporates Green Ethernet technology to reduce power consumption based on link status and cable length.
• Network Efficiency Features: Includes Flow Control, Storm Control, and Port Isolation to improve network performance and security.
• 다양한 장착: Supports both desktop placement and standard 19-inch rack mounting.

2. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• D-Link DGS-1024D 24포트 기가비트 언매니지드 스위치
• AC 전원 코드
• Rack-Mount Ears (for rack installation)
• 사용 설명서(본 문서)

If any of the above items are missing or damaged, please contact your local D-Link reseller for assistance.

3. 설정

The DGS-1024D switch is designed for simple plug-and-play installation. No software configuration is required.

3.1 물리적 설치

스위치는 책상 위에 놓거나 표준 19인치 장비 랙에 장착할 수 있습니다.

• 데스크탑 배치: Ensure the switch is placed on a flat, stable surface with adequate ventilation. Avoid placing objects on top of the switch that could block airflow.
• 랙 장착: Attach the provided rack-mount ears to the sides of the switch using the included screws. Secure the switch into a standard 19-inch equipment rack.

그림 1: 전면 view of the D-Link DGS-1024D switch, showing 24 Ethernet ports and LED indicators.

Figure 2: Dimensions of the D-Link DGS-1024D switch, indicating its compact size for various installations.

3.2 전원 연결

1. Connect the supplied AC power cord to the power input on the rear panel of the switch.
2. 전원 코드의 다른 쪽 끝을 표준 전기 콘센트에 꽂습니다.
3. 전면 패널의 전원 LED가 켜지면 스위치에 전원이 공급되고 있음을 나타냅니다.

그림 3: 후면 view of the D-Link DGS-1024D switch, highlighting the AC power input and ground connection.

3.3 네트워크 연결

1. Connect Ethernet cables from your network devices (computers, printers, network-attached storage, routers, etc.) to any of the 24 RJ45 ports on the front panel of the DGS-1024D switch.
2. The switch supports Auto MDI/MDI-X, so you can use either straight-through or crossover Ethernet cables.
3. Each port features Auto-negotiation, automatically detecting the link speed (10, 100, or 1000 Mbps) and duplex mode of the connected device for optimal performance.
4. The Link/Act LEDs for each port will illuminate when a valid network connection is established and blink to indicate data activity.

4. 사용 설명서

The DGS-1024D is an unmanaged switch, meaning it operates automatically without requiring user configuration. Once powered on and connected to your network devices, it will begin forwarding data.

4.1 LED 표시등

전면 패널 LED는 스위치 작동 상태를 시각적으로 보여줍니다.

• 전원 LED:
  • 솔리드 그린: 스위치가 켜져 있습니다.
  • 끄다: 스위치에 전원이 공급되지 않습니다.
• 링크/동작 LED(포트당):
  • 솔리드 그린: A valid network link is established at 1000 Mbps.
  • 호박색: 10/100Mbps의 유효한 네트워크 링크가 설정되었습니다.
  • 깜박임 : Data is being transmitted or received on that port.
  • 끄다: No network device is connected, or there is a link issue.

그림 4: 클로즈업 view of the DGS-1024D front panel, showing the LED indicators for power and individual port status (Link/Act, speed).

4.2 Green Ethernet Features

The DGS-1024D incorporates D-Link Green Ethernet technology to optimize power consumption:

• Link Status Detection: Automatically reduces power to ports that are idle or not connected to a device.
• Cable Length Detection: Adjusts power usage based on the length of the connected Ethernet cable, consuming less power for shorter cables.
• 에너지 효율 이더넷(EEE): Dynamically reduces power consumption during periods of low data activity.

5. 유지관리

The DGS-1024D switch is designed for minimal maintenance.

• 청소: 부드럽고 마른 천으로 스위치 외부를 닦으세요. 액체나 에어로졸 세척제는 사용하지 마세요.
• 통풍: Ensure that the ventilation openings on the sides of the switch are not blocked to prevent overheating. The fanless design relies on natural convection for cooling.
• 펌웨어 업데이트: As an unmanaged switch, the DGS-1024D typically does not require user-initiated firmware updates. Any updates would generally be handled by D-Link and are not user-serviceable.

6. 문제 해결

If you encounter issues with your DGS-1024D switch, refer to the following common troubleshooting steps:

• 전원 없음:
  • 전원 코드가 스위치와 콘센트에 제대로 연결되어 있는지 확인하십시오.
  • 다른 장치를 연결해 전기 콘센트가 제대로 작동하는지 확인하세요.
  • 전면 패널의 전원 LED가 켜져 있는지 확인하십시오.
• 포트에 링크/활동이 없습니다.
  • 이더넷 케이블이 스위치 포트와 네트워크 장치에 제대로 연결되어 있는지 확인하십시오.
  • 네트워크 장치의 전원이 켜져 있고 정상적으로 작동하는지 확인하십시오.
  • 케이블에 결함이 있는지 확인하려면 다른 이더넷 케이블을 사용해 보세요.
  • 장치를 스위치의 다른 포트에 연결해 보십시오.
  • Check the Link/Act LED for the port. If it's off, there's no active link.
• 네트워크 성능 저하:
  • Ensure all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal speed. The Link/Act LED should be solid green for Gigabit connections.
  • Check for excessive network traffic or potential network loops.
  • 스위치와 연결된 장치를 재시작하십시오.
• 간헐적인 연결:
  • 이더넷 케이블에 손상이 있는지 점검하십시오.
  • Ensure the switch is in a well-ventilated area to prevent overheating.
  • 다른 전자 기기에서 발생하는 전자기 간섭을 확인하십시오.

For further assistance, please refer to the D-Link support website or contact D-Link technical support.

7. 사양

8. 보증 및 지원

The D-Link DGS-1024D switch is backed by D-Link's Limited Lifetime Coverage, reflecting over 35 years of building reliable networking solutions. This warranty ensures long-term peace of mind for your network infrastructure.

For technical support, product registration, or to access the latest documentation and software updates, please visit the official D-Link support web대지.

D-Link Support: www.dlink.com/support