Behringer DJX400

소개

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

앞쪽 view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

설정

Follow these steps to properly set up your DJX400 mixer.

1. 개봉 및 검사

• 믹서기를 포장에서 조심스럽게 꺼내세요.
• 운송 중 발생했을 수 있는 손상 흔적이 있는지 제품을 검사하십시오. 손상이 발견되면 즉시 판매점에 연락하십시오.
• Ensure all accessories, including the power cable, are present.

2. 오디오 소스 연결

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• 라인 입력(RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. 오디오 출력 연결

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• REC Output (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. 전원 연결

• 믹서의 전원 스위치가 꺼짐(OFF) 위치에 있는지 확인하십시오.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

운영

This section details the functions of the DJX400's controls and how to operate the mixer.

1. 채널 제어

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• 제어권을 얻다: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• 채널 페이더: Controls the volume level of the individual channel.
• PFL(Pre-Fader Listen) 버튼: Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. 크로스페이더

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• 크로스페이더: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. 마스터 섹션

• 마스터 레벨: Controls the overall output volume of the mixer to the main PA system.
• BOOTH LEVEL: Adjusts the volume of the BOOTH output for your monitor speakers.
• 마이크 레벨: Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• 헤드폰 레벨: 헤드폰 출력 볼륨을 조절합니다.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

유지

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

청소

• Always disconnect the mixer from power before cleaning.
• 부드럽고 마른 보풀 없는 천으로 외부 표면을 닦아주세요.
• 완고한 먼지의 경우 약간 damp 순한 비누를 묻힌 천으로 닦은 후 마른 천으로 닦아주세요.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

저장

• 사용하지 않을 때는 믹서를 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
• Protect the mixer from dust by covering it with a dust cover.

문제 해결

This section addresses common issues you might encounter with your DJX400 mixer.

명세서

Key technical specifications for the Behringer DJX400 DJ Mixer:

보증 및 지원

베링거 제품은 뛰어난 신뢰성과 성능을 위해 설계되었습니다. 자세한 보증 정보 및 기술 지원은 베링거 공식 웹사이트를 참조하십시오. web해당 웹사이트를 방문하시거나 가까운 공인 대리점에 문의하십시오. 보증 청구를 위해서는 구매 영수증을 증빙 자료로 보관하십시오.

• 온라인 지원: 베링거 공식 웹사이트를 방문하세요. web자주 묻는 질문(FAQ), 소프트웨어 다운로드 및 지원 자료를 제공하는 사이트입니다.
• 서비스 센터: 수리 및 유지보수를 위해 공인 서비스 센터를 찾으십시오.