성능 도구 W270
Performance Tool W270 Universal 3-Jaw Filter Wrench User Manual
Comprehensive guide for the proper use and maintenance of your Performance Tool W270 Universal 3-Jaw Filter Wrench.
1. 서론
The Performance Tool W270 3-Jaw Filter Wrench is engineered for efficient removal of oil filters on a wide range of vehicles. Its robust design and universal fit make it an essential tool for automotive maintenance. This manual provides detailed instructions to ensure safe and effective operation, care, and longevity of your wrench.
Figure 1: Performance Tool W270 Universal 3-Jaw Filter Wrench.
2. 주요 특징
The W270 filter wrench incorporates several design elements for superior performance and durability:
- 범용 맞춤 : Designed to fit popular cars and light trucks, accommodating filters from 2 1/2 inches to 3 7/8 inches in diameter.
- 내구성 있는 구조: Manufactured from heat-treated carbon steel for enhanced strength and resilience against demanding use.
- 부식 저항성: Features a tough black oxide finish that provides protection against rust and corrosion.
- 간편한 조작: Compatible with a standard 3/8-inch drive ratchet for straightforward application of torque.
- Three-Jaw Grip: Three robust jaws provide a secure and self-tightening grip on the oil filter as torque is applied, minimizing slippage.
Figure 2: Illustration of key features including adjustable range, 3/8 inch drive, heavy-duty construction, and three-jaw design.
3. 설정 및 준비
Before using the Performance Tool W270 filter wrench, ensure you have the necessary supporting tools and safety equipment.
3.1 필요한 도구 및 재료:
- 3/8-inch drive ratchet or breaker bar
- 안전 안경
- 장갑
- 오일 드레인 팬
- New oil filter (if replacing)
3.2 작업 전 체크리스트:
- Inspect the wrench for any signs of damage or wear. Do not use if damaged.
- 작업 공간이 충분히 밝고 방해물이 없는지 확인하세요.
- Confirm the oil filter to be removed is within the wrench's compatible size range (2 1/2" to 3 7/8" diameter).
4. 사용 설명서
Follow these steps for safe and effective removal of oil filters:
- 렌치를 제 위치에 놓으십시오: Place the 3-jaw filter wrench over the oil filter. The jaws will automatically adjust to grip the filter. Ensure all three jaws are making firm contact with the filter housing.
- 래칫 부착: Insert your 3/8-inch drive ratchet or breaker bar into the square drive opening on the top of the wrench.
- 토크를 적용하세요: Turn the ratchet counter-clockwise to loosen the oil filter. The jaws of the wrench will tighten their grip as you apply force, preventing slippage.
- 필터 제거: Once the filter is sufficiently loosened, you may be able to unscrew it by hand. Be prepared for oil to drain from the filter and engine block.
- 정리: Dispose of the old filter and oil according to local regulations.
Figure 3: Demonstrating the Performance Tool W270 wrench in use with a 3/8-inch drive ratchet on an oil filter.
Caution: Always wear appropriate personal protective equipment, including safety glasses and gloves, when performing automotive maintenance. Ensure the vehicle is safely supported before working underneath it.
5. 관리 및 유지 보수
Proper care and maintenance will extend the life of your Performance Tool W270 filter wrench:
- 청소: After each use, wipe the wrench clean with a rag to remove any oil, grease, or dirt.
- 저장: Store the wrench in a dry environment to prevent rust. A toolbox or tool chest is ideal.
- 점검: Periodically inspect the jaws and pivot points for wear or damage. Ensure the jaws move freely.
- 매끄럽게 하기: A light application of general-purpose lubricant to the pivot points can help maintain smooth operation.
6. 문제 해결
다음은 일반적인 문제와 이에 대한 잠재적 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Wrench slips on filter. | Incorrect positioning; filter too oily; filter size outside range. | Ensure jaws fully grip filter; clean filter surface; verify filter diameter is within 2 1/2" to 3 7/8". |
| Difficulty loosening filter. | Filter overtightened; rust/corrosion. | 꾸준히 적용하고 증가시키세요asing pressure; use a longer breaker bar for more leverage; apply penetrating oil if rust is present. |
| Wrench feels stiff. | 윤활 부족, 먼지 쌓임. | Clean the wrench thoroughly and apply a light lubricant to pivot points. |
7. 제품 사양
| 기인하다 | 세부 사항 |
|---|---|
| 모델 번호 | W270 |
| 상표 | 성능 도구 |
| 재료 | Heat-treated Carbon Steel |
| 마치다 | Black Oxide, Powder Coated |
| Compatible Filter Diameter | 2 1/2 inches to 3 7/8 inches (63.5mm to 98.4mm) |
| 드라이브 크기 | 3/8인치 사각 드라이브 |
| 품목 무게 | 3.68온스(약 104g) |
| 원산지 | 중국 |
| 한국어: | 039564102707 |
8. 보증 정보
The Performance Tool W270 Universal 3-Jaw Filter Wrench is backed by a 평생 보증. This warranty covers defects in material and workmanship under normal use and service. For specific details regarding warranty claims, please refer to the product packaging or contact Performance Tool customer support.
Figure 4: Product packaging indicating Lifetime Warranty.
9. 지원 및 연락처
For technical assistance, product inquiries, or warranty service, please contact the manufacturer:
제조업체: 윌마, LLC
Web대지: Performance Tool Store on Amazon
Note: Specific contact information such as phone numbers or direct email addresses may be available on the official Performance Tool web사이트 또는 제품 포장.