소개
Thank you for choosing the wolfcraft 60mm Pointed Spring Clamps. These precision clamps are designed for a variety of tasks, particularly those requiring delicate handling and access to confined spaces. Their robust construction and thoughtful design ensure reliable performance for both home and craft projects.
This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your new clamps. Please read it thoroughly before first use and keep it for future reference.
안전 정보
Always observe the following safety precautions when using the wolfcraft 60mm Pointed Spring Clamps:
- 사용 전 검사하세요: CL을 확인amps are free from damage before each use. Do not use damaged clamps.
- Secure grip: 항상 cl을 확인하십시오amp has a firm grip on the workpiece. Avoid over-extending the jaws beyond their intended capacity.
- 표면 보호: While the jaws are designed to be soft, always test on a scrap piece or use additional padding if clamping delicate or finished surfaces.
- 더위를 피하세요: CL을 노출하지 마십시오amps to excessive heat, such as from soldering irons, as this may damage the plastic material and jaw pads.
- 명확하게 유지: Keep fingers and other body parts clear of the clamping area to prevent pinching.
- 저장: 상점 clamps in a dry, clean place, out of reach of children.
설정
The wolfcraft 60mm Pointed Spring Clamps are ready for immediate use out of the packaging. No assembly is required.
- cl을 제거하세요amps from their packaging.
- Inspect each clamp 눈에 보이는 손상이나 결함이 있는지 확인하세요.
- Familiarize yourself with the clamping mechanism by gently squeezing the handles to open the jaws and releasing to close them.
Figure 1: The wolfcraft 60mm Pointed Spring Clamps as they appear out of the package.
작동 지침
이러한 클amps are designed for precision work and general clamping needs. Follow these steps for optimal use:
- cl을 식별하십시오amp지역: Determine the specific point on your workpiece where clamping pressure is needed. The narrow design of these clamps allows access to tight or intricate areas.
- Open the jaws: Squeeze the handles firmly to open the clamping jaws. The maximum clamping width is 60mm.
- cl 위치amp: Place the open jaws around the workpiece. Ensure the soft precision clamping jaws make full contact with the surfaces to be held. The grooved surface on the jaws provides an enhanced grip.
- 압력을 가하세요: Slowly release the handles. The spring mechanism will apply consistent pressure, holding the workpiece securely. The soft jaws are designed to apply pressure without damaging the surface.
- 필요한 경우 조정합니다. If the workpiece shifts or the grip is not sufficient, remove the clamp and reposition it. The brushed surface of the handle ensures a non-slip grip during operation.
Figure 2: Using the clamp for precision work, such as holding a model car door.
Figure 3: The narrow design allows for clamping small components on circuit boards.
그림 4: 측면 view illustrating the narrow design and soft jaw tips.
유지
Proper maintenance ensures the longevity and optimal performance of your clamps:
- 청소: After each use, wipe the clamps with a clean, dry cloth to remove any dust, glue, or debris. For stubborn residue, a slightly damp 천을 사용한 후 완전히 말리세요.
- 매끄럽게 하기: The pivot point of the clamp is designed for smooth operation and generally does not require lubrication. If movement becomes stiff, a small amount of dry lubricant (e.g., silicone spray) can be applied, ensuring it does not get onto the clamp잉 턱.
- 저장: 상점 clamps in a clean, dry environment away from direct sunlight and extreme temperatures. Keeping them organized will prevent damage and make them easier to find for future projects.
Figure 5: The textured handle provides a secure, non-slip grip.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Clamp 안전하게 붙잡고 있지 않다 | Workpiece too thick; jaws not making full contact; jaws are dirty. | Ensure workpiece is within 60mm capacity. Reposition clamp for full jaw contact. Clean jaws thoroughly. |
| Surface damage on workpiece | Excessive pressure on delicate surface; jaws are dirty or damaged. | Use additional padding (e.g., cloth, rubber) between jaws and workpiece. Clean jaws. Inspect for damage; replace if necessary. |
| Clamp feels stiff or sticky | Accumulation of dirt/debris at pivot point. | Clean the pivot area. Apply a small amount of dry lubricant if needed. |
명세서
- 모델 번호: 3431000
- 상표: 울프크래프트
- 재료: 플라스틱
- Clamping Width: 60mm(약 2.36인치)
- 품목 무게: Approximately 0.32 ounces (per clamp)
- 조각 수: 2 (per package)
- 특징: Soft precision clamping jaws, narrow design, grooved surface, brushed non-slip handle.
Figure 6: Close-up of the soft, grooved clamp잉 턱.
보증 및 지원
wolfcraft products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official wolfcraft website. If you encounter any issues or require technical assistance, please contact wolfcraft customer support through their official channels.
자세한 내용은 공식을 방문하세요. 울프크래프트 web대지.