Creative Labs USB Sound Blaster Audigy2 External Sound System

소개

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Creative Labs USB Sound Blaster Audigy2 External Sound System. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

중요한 안전 정보

• 기기를 물이나 과도한 습기에 노출시키지 마세요.
• 열원 근처나 직사광선에 장치를 두지 마십시오.
• 장치와 함께 제공된 전원 어댑터만 사용하십시오.
• 기기를 직접 열거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
• 기기를 어린이의 손이 닿지 않는 곳에 보관하세요.

패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

• Creative Labs USB Sound Blaster Audigy2 External Sound System (Model 70SB030000000)
• USB 케이블
• 전원 어댑터
• 설치 CD(드라이버 및 소프트웨어)
• Remote Control (if included with your specific model variant)
• 빠른 시작 가이드(본 설명서)

제품 끝view

The Creative Labs USB Sound Blaster Audigy2 is an external sound card designed to enhance audio performance for your PC or notebook. It features various input and output ports for versatile connectivity.

전면 패널 컨트롤 및 포트

그림 1: Front Panel of the Sound Blaster Audigy2. This view highlights the main volume control knobs and front-facing input jacks for headphones, microphone, and line-in.

• 볼륨 조절 노브: Adjust master volume and other audio levels.
• Side/Phones Jack: Connect headphones or side speakers for surround sound configurations.
• Mic In Jack: Connect a microphone for recording or communication.
• Line In Jack: Connect external audio sources such as MP3 players or other audio devices.
• Optical In Port: 디지털 오디오 입력.

후면 패널 포트

그림 2: Rear Panel of the Sound Blaster Audigy2. This view displays the digital and analog audio output ports, USB connection, and power input.

• Optical Out Port: 디지털 오디오 출력.
• S/PDIF 출력 포트: 동축 디지털 오디오 출력.
• C/SUB (Center/Subwoofer) Jack: Connect center and subwoofer speakers.
• Rear Jack: Connect rear speakers for surround sound.
• Front Jack: 앞쪽 왼쪽과 오른쪽 스피커를 연결합니다.
• USB 포트: Connects to your computer via USB cable.
• 5V DC 입력: 동봉된 전원 어댑터의 전원 입력 단자입니다.

Device Label Information

그림 3: Bottom Label of the Sound Blaster Audigy2. This label provides regulatory compliance information, model number (SB0300), and serial number.

The bottom label of the device contains important information such as the model number (SB0300, which corresponds to 70SB030000000) and serial number. This information may be required for support or warranty claims.

설치 지침

1. 소프트웨어 설치: Before connecting the device, insert the Installation CD into your computer's optical drive and follow the on-screen instructions to install the necessary drivers and Creative software. Restart your computer if prompted.
2. 전원 연결: 제공된 전원 어댑터를 연결하십시오. 5V DC 입력 port on the rear of the Sound Blaster Audigy2, then plug the adapter into a wall outlet.
3. 컴퓨터에 연결: Connect one end of the USB cable to the USB port on the rear of the Sound Blaster Audigy2 and the other end to an available USB 2.0 port on your computer.
4. 스피커/헤드폰 연결:
   • For stereo headphones, connect to the Side/Phones 전면 패널의 잭.
   • For 2.1 speaker systems, connect the front speakers to the 앞쪽 jack and the subwoofer to the C/SUB 후면 패널에 잭이 있습니다.
   • For 5.1 or 7.1 surround sound systems, connect speakers to the corresponding 앞쪽, 뒤쪽, 그리고 C/SUB jacks on the rear panel, and side speakers (if applicable) to the Side/Phones 전면 패널의 잭.
5. 설치 확인: After connecting, your computer should detect the device. Open your operating system's sound settings to ensure the Sound Blaster Audigy2 is selected as the default audio playback and recording device.

작동 지침

기본 오디오 재생

Once the device is set up and drivers are installed, audio from your computer will be routed through the Sound Blaster Audigy2. Adjust the main volume using the large knob on the front panel or through your computer's software volume controls.

Microphone and Line-In Usage

To use a microphone or an external line-in source:

1. 마이크를 마이크 인 jack or your external audio device to the 라인 인 전면 패널의 잭.
2. Open your computer's sound recording settings and select the Sound Blaster Audigy2 as the input device.
3. Adjust input levels through the Creative software control panel or your operating system's sound mixer.

메모: As per user feedback, simultaneous use of both Line In and Mic In may not be fully supported, and one input might override the other. If experiencing issues, try using only one input at a time.

서라운드 사운드 구성

Utilize the Creative software control panel to configure your speaker setup (2.1, 5.1, 7.1) and optimize surround sound effects. Ensure your speakers are connected to the correct corresponding jacks on the rear and front panels.

원격 제어(해당되는 경우)

If your model includes a remote control, it can be used to adjust volume, mute audio, and control media playback functions. Functionality may vary depending on the media player software used on your computer. For full functionality, use with Creative's bundled software or compatible media players like Windows Media Player.

유지

• 청소: 부드럽고 마른 천을 사용하여 기기 외부를 닦으세요. 액체 세척제나 연마재를 사용하지 마세요.
• 저장: When not in use for extended periods, disconnect the power adapter and USB cable. Store the device in a cool, dry place.
• 소프트웨어 업데이트: Periodically check the Creative Labs website for updated drivers and software to ensure optimal performance and compatibility.

문제 해결

사운드 출력 없음:

• 전원 어댑터가 제대로 연결되어 있고 기기의 전원이 켜져 있는지 확인하십시오.
• Check that the USB cable is firmly connected to both the device and your computer.
• Verify that the Sound Blaster Audigy2 is selected as the default playback device in your computer's sound settings.
• Confirm that speaker/headphone cables are correctly plugged into the appropriate output jacks.
• Adjust the volume knobs on the device and your computer's software volume.
• Reinstall the drivers from the Creative Labs web대지.

컴퓨터가 장치를 인식하지 못함:

• 컴퓨터의 다른 USB 포트에 기기를 연결해 보세요.
• Ensure the power adapter is connected and providing power.
• 드라이버를 제거한 후 다시 설치하십시오.
• Check Device Manager (Windows) for any error indicators related to the sound card.

왜곡되거나 불량한 음질:

• 느슨한 케이블 연결을 확인하십시오.
• 오디오 소스의 품질이 좋은지 확인하세요.
• Adjust volume levels to prevent clipping or overdriving.
• 드라이버를 최신 버전으로 업데이트하세요.

명세서

보증 정보

This Creative Labs product comes with a limited warranty:

• 하드웨어: 1 년 제한 보증.
• 소프트웨어: 60일 제한 보증.

For detailed terms and conditions, please refer to the warranty card included in your package or visit the official Creative Labs support web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

고객 지원

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact Creative Labs customer support:

• 온라인 지원: Visit the official Creative Labs support website for FAQs, driver downloads, and contact options.
• 제품 등록 : Register your product online to receive updates and streamline support requests.

Please have your product model number (70SB030000000) and serial number (found on the bottom label) ready when contacting support.