Intermatic SS7C

Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

모델: SS7C

소개

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

안전 정보

경고: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

  • 설치하기 전에 전원이 분리되어 있는지 확인하십시오.
  • 모든 지역과 국가 전기 규정을 준수하세요.
  • 이 장치는 실내에서만 사용하세요.

패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

  • Intermatic SS7C Digital Wall Switch Timer Unit
  • 장착 나사
  • 와이어 너트
  • 사용 설명서(본 문서)

설정 및 설치

필요한 도구: Screwdriver, Wire Strippers, Electrical Tape.

  1. 전원 끄기: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltag전자 테스터.
  2. 기존 스위치 제거: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
  3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
    Intermatic SS7C Digital Wall Switch Timer front view

    이미지: 앞면 view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

    • 라인 와이어: Connect to the timer's LINE terminal.
    • 부하 와이어: Connect to the timer's LOAD terminal.
    • 접지선: Connect to the timer's GROUND terminal.
    • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
  4. 타이머를 장착하세요: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
  5. 복원력 : Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

운영 및 프로그래밍

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. 현재 시간 및 요일 설정

  1. 를 누르세요 시계 버튼을 누르면 시간 표시가 깜빡입니다.
  2. 사용하세요 시간 그리고 분 현재 시간을 조정하는 버튼입니다.
  3. 를 누르세요 낮 버튼을 눌러 현재 요일을 설정합니다.
  4. 누르다 시계 again to save and exit, or wait a few seconds for it to save automatically.

2. 켜짐/꺼짐 이벤트 프로그래밍

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

  1. 를 누르세요 음식물 버튼을 누르면 디스플레이에 "1 ON"이 표시됩니다.
  2. 사용 시간, 분, 그리고 낮 buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
  3. 누르다 음식물 다시 한번. 디스플레이에 "1 OFF"가 표시됩니다.
  4. Set the desired OFF time and day(s) for Program 1 using the 시간, 분, 그리고 낮 버튼.
  5. 추가 프로그램(2 ON/OFF부터 6 ON/OFF까지)에 대해서는 1~4단계를 반복하십시오.
  6. 원하는 프로그램을 모두 설정한 후, 누르세요. 시계 정상적인 작동으로 돌아가다.

3. 수동 조작

To manually turn the connected device ON or OFF outside of programmed times, press the 켜짐/꺼짐 button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

유지

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

  • 배터리 교체: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
  • 청소: Clean the timer's surface with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.

문제 해결

문제가능한 원인해결책
타이머가 프로그래밍된 시간에 켜지거나 꺼지지 않습니다.Incorrect programming; Manual override active; Power interruption.Review programming steps. Ensure manual override is not active. Check power supply.
디스플레이가 비어 있거나 어둡습니다.No power to the unit; Internal battery low.Check circuit breaker. If power is present, the internal battery may need replacement.
Programming is lost after power outage.내장 배터리가 방전되었거나 고장났습니다.The internal battery needs replacement. Contact support if within warranty.
Connected device does not respond.Incorrect wiring; Faulty device; Overload.Verify wiring connections. Test the connected device independently. Ensure load does not exceed timer's rating.

명세서

  • 상표: 인터매틱
  • 모델 번호: SS7C
  • 품목 무게: 0.35 파운드
  • 설정 수: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
  • 화면 크기: 1.5 인치
  • 색상: 하얀색
  • 제조업체: INTERMATIC INC
  • 한국어: 078275056732
  • ASIN: B0000BYDA2

보증 및 지원

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1년 제한적 제조사 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic web자세한 내용은 해당 사이트를 참조하거나 제품 포장과 함께 제공된 연락처 정보를 참조하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.