디링크 DGS-1005D

D-Link DGS-1005D 5-Port Gigabit Switch User Manual

Model: DGS-1005D

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your D-Link DGS-1005D 5-Port 10/100/1000 Gigabit Desktop Switch. This device is designed to enhance your network's performance by providing high-speed connectivity for multiple devices.

2. 주요 특징

  • Non-blocking Switching Architecture: Ensures maximum data throughput by filtering and forwarding packets at full wire-speed.
  • 8,000 MAC Address Table: Provides extensive scalability for large network environments.
  • 광범위한 호환성: Works seamlessly with virtually all 10, 100, and 1000 Mbps Ethernet devices.
  • 플러그 앤 플레이 설치: Requires no configuration, making setup simple and hassle-free.
  • Auto MDI/MDI-X Crossover: Eliminates the need for crossover cables or dedicated uplink ports on all ports.
  • 자동 협상: Automatically senses link speed (10, 100, or 1000 Mbps) and adjusts for optimal performance.
  • 진단 LED: Provide visual status and activity indicators for quick problem detection.

3. 패키지 내용

패키지에 다음 품목이 포함되어 있는지 확인하십시오.

  • DGS-1005D Switch
  • 전원 어댑터
  • 사용 설명서 (본 문서)
  • 장착 액세서리
  • 고무 다리 4개

4. 설정

4.1 물리적 설치

  1. 놓기: Place the DGS-1005D switch on a flat, stable surface, such as a desktop, or mount it using the provided accessories. Ensure adequate ventilation around the device.
  2. 고무 발 부착: If placing on a desktop, attach the four rubber feet to the bottom of the switch to prevent scratching and provide stability.
  3. 전원 연결: Connect the provided power adapter to the DC 5V port on the back of the switch and then plug the adapter into a standard electrical outlet. The Power LED on the front panel should illuminate.

4.2 네트워크 연결

  1. 장치 연결: Use standard Ethernet cables (Cat5e or higher recommended for Gigabit speeds) to connect your network devices (computers, servers, network printers, etc.) to any of the five available Gigabit Ethernet ports on the switch.
  2. 연결 확인: Once a device is connected, the corresponding Link/Act LED for that port on the front panel will illuminate, indicating a successful connection. A blinking LED indicates network activity.
D-Link DGS-1005D 5-Port Gigabit Switch front view

그림 1: 전면 view of the D-Link DGS-1005D 5-Port Gigabit Switch, showing the D-Link logo, "Gigabit Switch" label, and five LED indicators for ports 1-5.

D-Link DGS-1005D 5-Port Gigabit Switch rear view 포트가 있는

그림 2: 후면 view of the D-Link DGS-1005D 5-Port Gigabit Switch, displaying the five Ethernet ports (labeled 1-5) and the DC 5V power input port.

5. 스위치 작동

The DGS-1005D is a plug-and-play device, requiring no software configuration. Once powered on and connected to your network devices, it will automatically begin forwarding data.

5.1 LED 표시등

LED 표시등상태설명
솔리드 그린스위치가 켜져 있습니다.
링크/액트(포트별)솔리드 그린A valid network connection is established on the port.
링크/액트(포트별)녹색 깜박임포트를 통해 데이터가 전송되거나 수신되고 있습니다.

6. 유지관리

The DGS-1005D switch is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure optimal performance:

  • 청소: 부드럽고 마른 천으로 스위치 외부를 닦으세요. 액체나 에어로졸 세척제는 사용하지 마세요.
  • 통풍: Ensure that the ventilation openings are not blocked. Do not place the switch in an enclosed space without proper airflow.
  • 전원 주기: If the switch is unresponsive or experiencing issues, try power cycling it by unplugging the power adapter for 10 seconds and then plugging it back in.

7. 문제 해결

If you encounter issues with your DGS-1005D switch, refer to the following common troubleshooting steps:

  • 전원 없음: If the Power LED is off, ensure the power adapter is securely connected to both the switch and a working electrical outlet. Try a different outlet.
  • 링크/활동 없음: If a Link/Act LED is off for a connected device, check the Ethernet cable connection at both ends. Try a different cable or port. Ensure the connected device is powered on and its network adapter is functioning correctly.
  • 네트워크 속도가 느립니다: Ensure all connected devices and cables support Gigabit Ethernet (Cat5e or higher). Verify that the Link/Act LED is solid green, indicating a Gigabit connection.
  • 간헐적인 연결: Check for loose cable connections. Ensure the switch is not overheating and has adequate ventilation.
Bottom label of D-Link DGS-1005D switch showing model and serial number

Figure 3: Bottom label of the D-Link DGS-1005D switch, displaying the model number (DGS-1005D), part number (BDGS1005D.B1), serial number (DR1914A004836), hardware version (B1), and regulatory compliance marks (FCC, CE, CSA, UL).

For further assistance, please refer to the serial number: DR1914A004836

8. 사양

특징세부 사항
모델 번호DGS-1005D
상표디링크
포트 수5
데이터 전송 속도초당 1000메가비트(Mbps)
호환 장치Desktop computers, servers, network devices
치수(길이 x 너비 x 높이)11 x 8.25 x 2.75 인치
품목 무게1.15파운드
제조업체(주)디링크시스템즈
한국어:790069252716
ASINB0000BVYY2

9. 보증 및 지원

For warranty information and technical support, please visit the official D-Link website or contact D-Link customer service. Keep your purchase receipt and the product's serial number (found on the bottom label, e.g., DR1914A004836) handy when seeking support.

Official D-Link Web대지: www.dlink.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.