Modern Extendable Wooden Dining Table

소개

Thank you for choosing the Modern Extendable Wooden Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining table. Please read these instructions carefully before beginning assembly and retain them for future reference.

안전 정보

• 긁힘을 방지하려면 항상 부드럽고 깨끗한 표면에 테이블을 조립하세요.
• 사용 전에 모든 나사와 패스너가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조여 주십시오.
• 테이블 위에 서거나 앉지 마십시오.
• Do not exceed the recommended weight capacity of the table.
• 조립 중에는 어린이의 손이 닿지 않는 곳에 작은 부품을 보관하여 질식 위험을 방지하세요.
• Use caution when extending or retracting the table to avoid pinching fingers.

패키지 내용

조립을 시작하기 전에 모든 구성품이 있는지 확인하세요. 부품이 누락되었거나 손상된 경우 고객 지원 센터에 문의하세요.

명세서

Figure 1: Dining Table Dimensions

설정 및 조립

This dining table requires assembly. Please follow these general steps. Specific diagrams and hardware may vary slightly. It is recommended to have two people for assembly.

1. 구성 요소 풀기: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or cardboard) to prevent damage. Identify all parts against the package contents list.
2. 기지를 조립하세요: Attach any necessary support beams or crossbars to the double sturdy bases according to the included diagrams. Ensure all connections are firm.
3. 받침대를 테이블 상판에 부착하세요: Carefully place the tabletop upside down on your protected surface. Align the assembled bases with the pre-drilled holes on the underside of the tabletop. Secure the bases to the tabletop using the provided screws and bolts. Do not fully tighten until all connections are made.
4. Assemble Extension Mechanism (if separate): If the extension mechanism is not pre-assembled, follow the instructions to install it on the underside of the tabletop.
5. Insert Extension Leaf: If the table is designed with a removable leaf, ensure the runners are clear. Insert the extension leaf into the center of the table, aligning it with the main tabletop sections.
6. 최종 조임: 모든 구성 요소를 제자리에 놓고 정렬한 후 모든 나사와 볼트를 완전히 조입니다.
7. 테이블을 똑바로 세우세요: 다른 사람의 도움을 받아 조심스럽게 테이블을 바로 세우십시오.

Figure 2: Fully Assembled Dining Table

작동 지침

테이블 확장

1. Clear the tabletop of all items.
2. Locate the locking mechanisms (if any) underneath the table that secure the two halves of the tabletop. Unlock them.
3. Gently pull the two halves of the tabletop apart. The extension runners will slide, creating a gap in the center.
4. Carefully place the extension leaf into the gap, ensuring it sits flush and aligns with the main tabletop surface.
5. Push the two halves of the tabletop back together until they meet the extension leaf and are flush.
6. Re-engage the locking mechanisms underneath the table to secure the extended tabletop.

Figure 3: Table in Extended Position

테이블 축소

1. Clear the tabletop of all items.
2. Unlock the locking mechanisms underneath the table.
3. Gently pull the two halves of the tabletop apart to create a gap.
4. Carefully lift and remove the extension leaf. Store it in a safe place to prevent damage.
5. Push the two halves of the tabletop back together until they meet and are flush.
6. Re-engage the locking mechanisms underneath the table to secure the compact tabletop.

Figure 4: Table in Compact Position

유지

• 청소: 테이블 표면을 부드러운 천으로 닦으세요.amp cloth. Avoid harsh chemicals or abrasive cleaners that can damage the wood finish.
• 유출: Clean spills immediately to prevent staining, especially on wooden surfaces.
• 열과 습도: Use coasters and placemats to protect the tabletop from hot dishes, moisture, and scratches.
• 햇빛: Avoid prolonged exposure to direct sunlight, which can cause fading or warping of the wood.
• 정기 점검: Regularly inspect all fasteners and connections. Tighten any loose screws or bolts to maintain stability.

문제 해결

테이블이 흔들거린다

• 모든 조립 나사와 볼트가 완전히 조여졌는지 확인하십시오.
• Check that the table is on a level surface. Adjust furniture glides or place shims if necessary.

Extension Mechanism is Stiff or Stuck

• Ensure the locking mechanisms are fully disengaged.
• Check for any debris or obstructions in the extension runners. Clean if necessary.
• Apply a small amount of silicone-based lubricant to the runners if they are excessively stiff.

Tabletop Not Flush After Extension

• Ensure the extension leaf is correctly seated and fully inserted.
• Verify that the locking mechanisms are properly engaged to pull the sections together.

사용자 팁

• For optimal stability, always extend or retract the table with two people.
• When not using the extension leaf, store it flat in a dry place to prevent warping.
• Consider adding felt pads to the bottom of the table bases to protect your flooring and make moving the table easier.

보증 및 지원

For any questions, concerns, or to report missing/damaged parts, please contact the seller or manufacturer directly. Please have your model number (W1347) and purchase information ready when contacting support.